Ok iam bout to finish up my build now can i just take the shifter assembly off and pour tranny fluid into thier?

-94 camaro t56

 

I think you can, but there should be a fill plug on the drivers side of the tranny

 

thier is a fill plug i was just askin if i could do it from the shifter!

 

Yes, absolutely!! Still, you should pull out the "Fill" plug before you put the fluid in, then pour the fluid into the tranny (where the shifter would go ... which is super easy! ) and once fluid starts to pour out of the Fill hole, you know it's full (then put the Fill plug back in ... before you waste too much fluid! ).