Hey I had to order the clutch master slave cylinder for my 93z,....The only one i could find was from GM that had the whole system pre-bled with the resivoir. My only question is that do i have to remove the the steering knuckle in order to get the master cylinder in???? it looks like a real tight fit and is there going to be any other problems along the way and how long does anyone think the install will take??????? please if anyone can help would be appreciated..
thanks

 

Did mine recently and you don't have to remove the steering knuckle, just have a friend push the bolts/ubolt thru the firewall and learn how to bend 3 ways under the dash bolting it up. Take the lower part of your dash off (the bolster under the steering wheel) as I found the hardest part is getting the master cyl end on the clutch pedal and the dang retaining clip. It'll take a little bit but you'll get it.

 

thanks for the info I'll let you know how i make out this week,....

thanks.
terry