Hey everyone a drive a 2000 Z28 A4 its all stock as far as I know but I bought it used so not to sure on the history. When I attempt to burn out my car it begins to burnout. Than maybe after a brief burnout it hops from the back, looses its traction and goes forward. Any ideas?

 

is the traction arm and bushing ok?

 

I got under it today but were expecting rain in San Antonio this whole weekend. I am still in the process of finding out what this car needs fixed. I'll check that out thanks.

 

its stock camaro syndrome. you need lca relocate brakets and at least a ploly torque arm bushing to fix it. mine was terible before rear suspension mods.

 

Id add in some tubular LCAs too

 

And maybe some new rear shocks also.

How many miles on your new ride?

 

Agreed. I would inspect the shocks and bushings.

 

I have boxed BMR lower control arms, and an aftermarket torque arm NO bouncing issues. All the rest is stock

Jay

 

Yeah, but you just blow the tires away anyways

 

The vehicle has 90,000 miles. I think it is the shocks though I think the guy that had this car really just drove the crap out of it without taking care of it so I'm slowly but surely nursing it back to health.

 

my car did that 1 time and that was it for me. new shocks springs bmr torque arm/poly mount bmr rlca and no more bounce.

 

It could be the rear suspension, or bushings or shocks. Inspect all the rear end suspension components before purchasing anything. When my car was bone stock with 35K miles it would wheel hop terribly. A set of tubular LCA's and panhard bar fixed the problem. At about 85K the car started wheel hopping again, found the rear shocks to be worn out, replaced them and solid once again.