'97 LT1 M6 - Trouble getting in gear, clutch seems partialy engaged.
'97 LT1 M6 - Trouble getting in gear, clutch seems partialy engaged.
Alright so I bought a '97 SS recently and we're having some problems with it. I was driving along and couldn't get it in fourth gear. I ****ed around with it and tried for 3rd gear, etc. And couldn't get it in gear. So I pulled over, killed it and ****ed with the shifter and got it in first. I quickly fired the engine and (with the clutch in) it lurched foward so I dumped the clutch real quick and got going. It's drivable, I can not find 4th gear still it seems. Possibly the syncro?
Anyways the clutch seems to partially engaged, it is drivable but tricky.
Here's the list of possible things we think it could be.
- Master Cylinder
- Syncro
- Clutch itself
- Throwout bearing.
Any suggustions? I'm taking it by a few a shops tomorrow then me and Drew (Andrew Rhines) are going to start tearing into it tomorrow night I believe.
Anyways the clutch seems to partially engaged, it is drivable but tricky.
Here's the list of possible things we think it could be.
- Master Cylinder
- Syncro
- Clutch itself
- Throwout bearing.
Any suggustions? I'm taking it by a few a shops tomorrow then me and Drew (Andrew Rhines) are going to start tearing into it tomorrow night I believe.
I had the same problem as you guys mentioned. Mine was making some very nice noises though when i took off and started it in gear so i could get where i was going. Fixed it today with a spec 2+ and a new flywheel.
Here are some pics of the damage:

Here are some pics of the damage:

Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
slothgrant
Car Audio and Electronics
0
Aug 22, 2002 03:01 PM



