Is a '94 4l60e a direct replacement for a '96. I had thought that the harnesses were different when they changed from OBDI to OBDII.

Thanks for the help,

Joe

 

94 is not PWM {pulse width modulation} like the 96 is. It's a whole different animal electronics wise. I don't know all the stuff that would need to be changed in order for it to work right. It may be as simple as a pump - valve body swap, but as I said, I don't know.
Good luck.

 

too many differences to try unless you are willing to spend more on getting the 94 in there then just rebuilding the 96. you will need new electerinics, the electronic conectors are different between the years and you would need new connectors, and re-pin them, I believe there are slight differences in the tail housing but not sure what exactly.

Check these out..
http://web.camaross.com/forums/showthread.php?t=174516
http://web.camaross.com/forums/showthread.php?t=103033
http://web.camaross.com/forums/showthread.php?t=402436
http://web.camaross.com/forums/showthread.php?t=408191
http://web.camaross.com/forums/showthread.php?t=365542
just to name a few , search is your friend...

 

Thanks guys. That answers my question.

Joe