So what are all the Big Dogs up to?
#1
So what are all the Big Dogs up to?
I remember hearing a lot of stuff, just wondering if anything is going yet? George has been mysteriously quiet, just curious as to whats up with everyone? What are your guys goals as well?
------------------
1994 Quasar-Blue Trans am GT
Borla cat back, 3:73's, Moroso CAI, 1LE bellows, 160* Stat, SLP Ram air hood, LT4 KM, Chrome Firehawk Rims, BFG DR's, Level Ten Trans, 2600 LevelTen Converter, Hotchkis STB, Edelbrock PHR
E.T. 13.585@99.06 1.85 60'
Just added: BBK headers/Y-Pipe
------------------
1994 Quasar-Blue Trans am GT
Borla cat back, 3:73's, Moroso CAI, 1LE bellows, 160* Stat, SLP Ram air hood, LT4 KM, Chrome Firehawk Rims, BFG DR's, Level Ten Trans, 2600 LevelTen Converter, Hotchkis STB, Edelbrock PHR
E.T. 13.585@99.06 1.85 60'
Just added: BBK headers/Y-Pipe
#2
My moter is done.The car is not anywhere near done.It is all a cash thing.It will probabbly go in my 95.I am having fun with the stock headed moter in it now and want to work on a 11.5-11.7 slip with it in.Then I will throw a front hoop in it. And see if my new 396 can tear up my 6 speed.
I would like to haul it to thunder racings gig and run it in the m6 class.With just a small shot.
The car that we are building for this moter to run in xtreeme street will be built over the fall and winter.
ED
------------------
95 Formula Solid Roller 9 Inch 4.10 H.D. Locker,6 speed
Best 1/4 12.074 Best MPH 115.56 on STOCK HEADS
94 Hardtop Heads up Drag car
94 Formula A4 Stock
120,000 miles 13.82
Tow Rig 84 suburban 3/4 4wheel drive 388 small block
I would like to haul it to thunder racings gig and run it in the m6 class.With just a small shot.
The car that we are building for this moter to run in xtreeme street will be built over the fall and winter.
ED
------------------
95 Formula Solid Roller 9 Inch 4.10 H.D. Locker,6 speed
Best 1/4 12.074 Best MPH 115.56 on STOCK HEADS
94 Hardtop Heads up Drag car
94 Formula A4 Stock
120,000 miles 13.82
Tow Rig 84 suburban 3/4 4wheel drive 388 small block
#3
Ed am I understanding that you're planning on spraying your stockhead combo to a 11.50 soon. I didn't know you even had a bottle in the thing. Frank95z
------------------
1995 Z28,Mystic teal metallic,A4,52TB,pulley,as&m headers,Crane 210/224,Strange 12bolt,Et streets Best 11.66 114.62 1.51 NA
------------------
1995 Z28,Mystic teal metallic,A4,52TB,pulley,as&m headers,Crane 210/224,Strange 12bolt,Et streets Best 11.66 114.62 1.51 NA
#4
Registered User
Join Date: Nov 1999
Location: Where people don't discriminate about your induction system.
Posts: 99
Who are the "Big Dogs"?
People that run 11.5's and can't spell motor? J/K
From what I've heard most people are just getting stuff together. Some having problems, some just not having anough time/money.
I'm hopefully going to make my license runs, FINALLY, this weekend? Hopefully!
Hope to run high 8's low 9's spraying the motOr.
Will hopefully be at the last three PRO events also.
George I heard was hoping to make the last two.
Madman better get his slowpoke butt out also!
Dave Brown
------------------
If a little's good,
More is better,
And too much is just right!!!
People that run 11.5's and can't spell motor? J/K
From what I've heard most people are just getting stuff together. Some having problems, some just not having anough time/money.
I'm hopefully going to make my license runs, FINALLY, this weekend? Hopefully!
Hope to run high 8's low 9's spraying the motOr.
Will hopefully be at the last three PRO events also.
George I heard was hoping to make the last two.
Madman better get his slowpoke butt out also!
Dave Brown
------------------
If a little's good,
More is better,
And too much is just right!!!
#5
Frank.
No spray on the stock head/stock bottem end Motor.But I have been working on the suspension to work on the short time.My 12.07 runs were spinning through first.I have since bought new slicks ,new subframes antiroll bar, halls.I went to the track and snapped a hiem on my tourque arm.So It has been down for a few weeks.Most of those parts were for another car we are building.
I have a 396 lt1 with pro action 235's with a fogger sitting here just dying to be fired up
Dave
I was wondering when someone would pick up on the fact that I cant spell let alone type.
Good luck on the liscene runs this weekend.
------------------
95 Formula Solid Roller 9 Inch 4.10 H.D. Locker,6 speed
Best 1/4 12.074 Best MPH 115.56 on STOCK HEADS
94 Hardtop Heads up Drag car
94 Formula A4 Stock
120,000 miles 13.82
Tow Rig 84 suburban 3/4 4wheel drive 388 small block
[This message has been edited by Ed95Pont (edited July 16, 2002).]
No spray on the stock head/stock bottem end Motor.But I have been working on the suspension to work on the short time.My 12.07 runs were spinning through first.I have since bought new slicks ,new subframes antiroll bar, halls.I went to the track and snapped a hiem on my tourque arm.So It has been down for a few weeks.Most of those parts were for another car we are building.
I have a 396 lt1 with pro action 235's with a fogger sitting here just dying to be fired up
Dave
I was wondering when someone would pick up on the fact that I cant spell let alone type.
Good luck on the liscene runs this weekend.
------------------
95 Formula Solid Roller 9 Inch 4.10 H.D. Locker,6 speed
Best 1/4 12.074 Best MPH 115.56 on STOCK HEADS
94 Hardtop Heads up Drag car
94 Formula A4 Stock
120,000 miles 13.82
Tow Rig 84 suburban 3/4 4wheel drive 388 small block
[This message has been edited by Ed95Pont (edited July 16, 2002).]
#6
#7
I usually just feel like a Puppy instead of a Big Dog, but like Dave said Time and Money. A this point its moreso Time. I have Most of the parts I need.
------------------
Kurtis Tamez
LT4-396.com
97 Z28 LT4-396
94 Firehawk LT1-396
Team NW F-Body
------------------
Kurtis Tamez
LT4-396.com
97 Z28 LT4-396
94 Firehawk LT1-396
Team NW F-Body
#8
I hope to have my car running again by August 15th. I have the same goals as StrokedTA. I wont be able to run mine legally at the track till next fall. Mine is money and time holding me back =). Keep in mind my car went from completly stock all the way to the air box to what you see in the sig in about 2 months. So I've spent my cash flow up pretty quick. I'll see 9's this year for sure. I'm hoping for 10's on motor.
Jason
------------------
Plates: "Stock 95"
1995 Firebird Formula
O'ring/4bolt 383, GTP Race Ported AFR 210s, Yank TH400, Yank 3800 Stall, Trans Break, Moser 12 Bolt w/ 3.73s, and the usual stuff like Hooker Long Tubes, 58mm TB, Sphon Torque Arm, etc....
Jason
------------------
Plates: "Stock 95"
1995 Firebird Formula
O'ring/4bolt 383, GTP Race Ported AFR 210s, Yank TH400, Yank 3800 Stall, Trans Break, Moser 12 Bolt w/ 3.73s, and the usual stuff like Hooker Long Tubes, 58mm TB, Sphon Torque Arm, etc....
#9
I wanna be a big dog too
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
------------------
hchap63@hotmail.com
01/SS, Black A4, TR224/112, ARE stage 2 heads, lid, FTRA, PMAF, PTB, Grott LT, true duals, NGK, ASP pulley, Vig 3200, LCA, poly TAB, Convo pros, ET Streets, 3300 raceweight. Little bit of juice..
Best ET: (All bolt ons) 11.496@116.42 (1.52)
Current best after Head & cam & nitrous:
10.88@124 (1.60)
Motown Muscle King of The Hill winner 6-8-02. Want some? Get some!!
RIP #3 Dirty Dale!!!
#10
well i just put my th400 in and im having the 10pt cage install asap. still got to get my license to run low 9's but thats in the making, ill have everything wraped up in about a month just got to get the time to do it.
------------------
95 ta m6 lunati 383,pro performance stage 2 heads, gtp cam, spec clutch, holley 52, strange 12 bolt, tnt n20, hooker 1 3/4 long, 3 inch exh flowmaster,
452.0rwhp and 416.5 rwtq
676.8rwhp and 842.8rwtq on n2o
------------------
95 ta m6 lunati 383,pro performance stage 2 heads, gtp cam, spec clutch, holley 52, strange 12 bolt, tnt n20, hooker 1 3/4 long, 3 inch exh flowmaster,
452.0rwhp and 416.5 rwtq
676.8rwhp and 842.8rwtq on n2o
#12
Time and money, that's for sure. I'm not going to be out untill next spring at this point. No sense in half a$$ing it, gotta do it right. Should be tweaking for the 9's by April.
------------------
94 Formula M6
Last year 10.98 @ 126
355 stock heads, P600
In the works:
383 worked heads, D1, th400
------------------
94 Formula M6
Last year 10.98 @ 126
355 stock heads, P600
In the works:
383 worked heads, D1, th400
#13
Can I be a big dog? Or a pup?
Have a few parts to buy and getting them on the car. Lots of stuffis done. Its the little stuff that seems to be holding me up the most right now.
I hope to have the car legal and tuned to race at the Thunder Racing event.
Check my webpage for pics and updates
www.hustonstreetracing.com
Edit: My goal is 9.80 on around 17psi of boost. Anything faster than that would make me smile more.
------------------
-Curt Ailes
86 IROC w/ T88 Turbocharger
http://www.hustonstreetracing.com
[This message has been edited by Guido (edited July 18, 2002).]
Have a few parts to buy and getting them on the car. Lots of stuffis done. Its the little stuff that seems to be holding me up the most right now.
I hope to have the car legal and tuned to race at the Thunder Racing event.
Check my webpage for pics and updates
www.hustonstreetracing.com
Edit: My goal is 9.80 on around 17psi of boost. Anything faster than that would make me smile more.
------------------
-Curt Ailes
86 IROC w/ T88 Turbocharger
http://www.hustonstreetracing.com
[This message has been edited by Guido (edited July 18, 2002).]