Drag Racing Technique Improve your track times

SFI dates

Thread Tools
 
Search this Thread
 
Old 06-08-2008, 11:40 AM
  #1  
Banned
Thread Starter
 
mdacton's Avatar
 
Join Date: Oct 2006
Location: Goochland, Va.
Posts: 4,974
SFI dates

How long are 4.1 tans shields good for? 5 years?

and the date on the tag is the manufacturers date or the date it expires?

I have seached for a list of SFI regulations. Anyone know where to find it, I'm sure its on nhra/ihra but I cannot find the list.
mdacton is offline  
Old 06-08-2008, 01:57 PM
  #2  
Registered User
 
cnorton's Avatar
 
Join Date: Jul 2003
Location: Southern California
Posts: 553
There's a reference table in the back of the NHRA Rulebook. It says that the "rigid" shield is good for 5 years and that the "flexible" shield is only 2. I believe that the date is the date of manufacture.

c
cnorton is offline  
Old 06-08-2008, 05:19 PM
  #3  
Registered User
 
Stephen 87 IROC's Avatar
 
Join Date: Mar 2000
Location: 51°N 114°W, 3500' elevation
Posts: 2,037
NHRA and IHRA say 5 years for all tranny shields. Flexplate shields are 5 years but flexplates are only 3 years.

If the flexible tranny shield (tranny blanket) is only 2 years then they're changed the rule since my old rule book.

The date on the tag is the manufactured date.
Stephen 87 IROC is offline  
Old 06-08-2008, 05:48 PM
  #4  
Registered User
 
cnorton's Avatar
 
Join Date: Jul 2003
Location: Southern California
Posts: 553
2008 NHRA Rulebook, page #278-279
4.1 rigid transmission shield, 5 years
4.1 flexible transmission shield, 2 years
27.1 window net (mesh), 2 years (couldn't find that last time I looked)
29.1 automatic transmission flexplate, 3 years
30.1 automatic transmission flexplate shield, 5 years

c
cnorton is offline  
Old 06-08-2008, 07:23 PM
  #5  
Registered User
 
Stephen 87 IROC's Avatar
 
Join Date: Mar 2000
Location: 51°N 114°W, 3500' elevation
Posts: 2,037
Damn NHRA making it harder for the sportsman racer again. I guess buying a blanket isn't going to be worth it when my shield expires again.

I normally run under IHRA rules which isn't as strict for the sportsman racer however I need to also have my car pass NHRA rules in case my sponsor wants me to travel to an NHRA track.

It's also good to see a distinction for the window net. Mesh nets expire. Ribbon nets don't. I don't know anyone that still uses a mesh net.
Stephen 87 IROC is offline  
Old 06-08-2008, 07:41 PM
  #6  
Registered User
 
CSJTA's Avatar
 
Join Date: May 1999
Location: Rich, Va.
Posts: 274
Originally Posted by mdacton
How long are 4.1 tans shields good for? 5 years?

and the date on the tag is the manufacturers date or the date it expires?

I have seached for a list of SFI regulations. Anyone know where to find it, I'm sure its on nhra/ihra but I cannot find the list.
Ya got to get it down the track first
CSJTA is offline  
Old 06-08-2008, 11:19 PM
  #7  
Banned
Thread Starter
 
mdacton's Avatar
 
Join Date: Oct 2006
Location: Goochland, Va.
Posts: 4,974
Originally Posted by CSJTA
Ya got to get it down the track first
Oh I can get it down the track..... either leaking or something broken


But I got the CSR molded shield/flexplate and trans. It will fit a 4th gen but its a real bitch to put in. I had to lower the rear of the K-member to get to the bolts. Huge PITA but I didn't want to add a lot of weight.

one like this
mdacton is offline  
Old 06-09-2008, 09:51 AM
  #8  
Registered User
 
cnorton's Avatar
 
Join Date: Jul 2003
Location: Southern California
Posts: 553
md, I thought that putting a CSR shield on a 4th gen with a stock floorpan would be a challenge when you asked the question awhile back. Sounds like it's time for some serious floorboard work. Sometimes it's hard to start swinging the hammer but you'd might as well bite the bullet and save yourself some grief down the road.

Good luck,

c
cnorton is offline  
Old 06-09-2008, 10:39 AM
  #9  
Registered User
 
OneFlyn95z28's Avatar
 
Join Date: Dec 1969
Location: Pacific North West
Posts: 1,431
From what I was told the Window Net rule only applies if the rules in your class mention it. I just bought a new one then was told my off one was fine.

I never had a chance to put my CSR full shield in before going to a TH400. It is sitting on top of my tool box
OneFlyn95z28 is offline  
Old 06-09-2008, 12:48 PM
  #10  
Registered User
 
cnorton's Avatar
 
Join Date: Jul 2003
Location: Southern California
Posts: 553
The two-year limit on mesh window nets is only enforced when the class you're running requires a cage (and a cage specifies a net). When I run my car in SS/JA it doesn't require either and my "old" mesh net is fine. Neither does it require a dated flexplate, transmission shield, or flexplate shield. If I take out 300 pounds to switch to SS/IA, all those items become required and the dates become an operative factor. Due to the "mandated costs" associated with going faster, it's more economical to keep the weight in the car and go a little slower.
cnorton is offline  
Old 06-09-2008, 02:20 PM
  #11  
Registered User
 
tomcowle's Avatar
 
Join Date: Mar 2007
Location: GENEVA, Ohio
Posts: 463
Mr. Norton, isn't Super J Automatic less "populated" too? Another good reason.

As I typed this I see a few Super J automatic for sale in ND this week.

Last edited by tomcowle; 06-09-2008 at 02:36 PM.
tomcowle is offline  
Old 06-09-2008, 02:42 PM
  #12  
Registered User
 
cnorton's Avatar
 
Join Date: Jul 2003
Location: Southern California
Posts: 553
Tom, actually, for the current racing year, at the time of the last report from Nitro Joe's Racing Stats (the bible for class racers) SS/JA as a class had more discrete entries than any other Super Stock class. Under the competition rules in NHRA for Super Stock classes, that makes it a better place to run if you have a fast car in the class. Ed Wright (on this board) also competes in SS/JA with an LT1 combination.

In reality, I believe that my car likes to run in SS/IA a little better. Removing 300 pounds is a serious change but the car really likes it when I make the changes to the suspension. I have run it in SS/HA as well but I never managed to get the chassis balanced quite right for the 2820# minimum weight. I needed to give it a little more time and effort.

c
cnorton is offline  
Old 06-10-2008, 12:11 AM
  #13  
Registered User
 
OneFlyn95z28's Avatar
 
Join Date: Dec 1969
Location: Pacific North West
Posts: 1,431
My times make it required because I am required to have a cage. Actually if you are required to have a cage you are required to have the net.

I hate the damn thing to. Wish they would let us use arm straps
OneFlyn95z28 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RUENUF
Cars For Sale
6
03-13-2016 03:37 PM
Boss002
Autocross and Road Racing Technique
7
01-20-2016 12:17 PM
RobFlag
New Member Introduction
5
08-29-2015 11:40 PM
karpetcm
Parts For Sale
5
08-14-2015 03:02 PM
njspder
Middle Atlantic
2
03-05-2015 05:39 AM



Quick Reply: SFI dates



All times are GMT -5. The time now is 11:48 PM.