Hey, I am about to buy mac midlenth headers and possibly scrap the flowmaster exhuast. So what next? i could barely make up my mind on headers long tubes or midlenths. but finely money and some hard searching brought me to my conclusion. So What next, maybe a cam and r.r's or gears because i have 2.73s or maybe a converter 2800stall? if i did the converter i would do gears with it and a trans go while i had the trans down. so now mabye you can see my sittuation.

thanks Joe

 

Gears + Converter. That will drop .5-.7 off your times easily. Provided you get traction of course.

 

I'll second gears and convertor. You won't be sorry. Just make sure you have some tires as well.

 

I agree....gears and converter.

 

Well, looks like conveter and gears. I think ill try 2800stall since its a 94 and i dont want issuse and some 3.73s. I have one other question how do i tune my car or have it tuned? Do i have to take my pcm out or what?

thanks alot
joe

 

You just have to find someone with a laptop and a USB cable to plug into the diagnostic port of the car (below the steering wheel on the bottom half of the dash.)