lt1 guys post ur 1/4 mile times and mods and A4 or M6
#20
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
Mods
K&N FIPK
!MAF Screen
1LE Elbow
160* Thermostat
MSD Digital 6
MSD Blaster Coil
Taylor 8mm Wires
NGK TR6 spark plugs
LT4 Knock Module
SLP 1 3/4" Shorty Headers
Morflow 3" offroad pipe
Borla Exhaust
Walbro 255lph In-tank Fuel Pump
SLP Fuel Pressure Regulator
FLP Level 4 4L60E
Vigilante 3200 Converter
B&M Tranny Cooler
Power Adder
TNT N20 Wet Kit
MSD Digital Window Switch
Chassis/Suspension
Alston Subframe Connectors
IRS Strut Tower Brace
Bilstien Shocks front & rear
Eibach Prokit Springs front & rear
32mm 1LE front Sway Bar
BMR LCAs
Spohn Relocation Brackets
Lakewood Adjustable Panhard Rod
Random Tech Torque Arm
21mm 1LE rear Sway Bar
Times
N/A:
1.760 60'
13.232@102.22
100 Shot:
1.737 60'
12.157@111.04
K&N FIPK
!MAF Screen
1LE Elbow
160* Thermostat
MSD Digital 6
MSD Blaster Coil
Taylor 8mm Wires
NGK TR6 spark plugs
LT4 Knock Module
SLP 1 3/4" Shorty Headers
Morflow 3" offroad pipe
Borla Exhaust
Walbro 255lph In-tank Fuel Pump
SLP Fuel Pressure Regulator
FLP Level 4 4L60E
Vigilante 3200 Converter
B&M Tranny Cooler
Power Adder
TNT N20 Wet Kit
MSD Digital Window Switch
Chassis/Suspension
Alston Subframe Connectors
IRS Strut Tower Brace
Bilstien Shocks front & rear
Eibach Prokit Springs front & rear
32mm 1LE front Sway Bar
BMR LCAs
Spohn Relocation Brackets
Lakewood Adjustable Panhard Rod
Random Tech Torque Arm
21mm 1LE rear Sway Bar
Times
N/A:
1.760 60'
13.232@102.22
100 Shot:
1.737 60'
12.157@111.04
#22
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
1993 A4 70k miles
13.554@100.76
1.99 60'
Mods:
Mac Headers
Mac High Flow cat
Magnaflow cat-back
3" cut out
1LE intake elbow
Air foil
CAI from ebay
TB bypass
PCMforless tune
13.554@100.76
1.99 60'
Mods:
Mac Headers
Mac High Flow cat
Magnaflow cat-back
3" cut out
1LE intake elbow
Air foil
CAI from ebay
TB bypass
PCMforless tune
Last edited by Farfignuten; 11-30-2005 at 12:21 PM.
#23
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
My last time at the track was about 2 years ago...
100% stock October 2002
14.09@99.3mph
2.1 60'
May 2003
13.804@103.7mph
2.16 60'
-Borla catback
-SLP CAI
-TB bypass
Car is a 6-speed
100% stock October 2002
14.09@99.3mph
2.1 60'
May 2003
13.804@103.7mph
2.16 60'
-Borla catback
-SLP CAI
-TB bypass
Car is a 6-speed
#24
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
built tranny, 2800 stall, 3.42 gear, m/t dr's, lcas and relos
Lt's, ory, gmmg, k&N cai, holley 58mm tb, 224/236 xe cam, 1.6 rr's, csi wp, msd 6al
Times in sig car weighs 3630 for those runs
Lt's, ory, gmmg, k&N cai, holley 58mm tb, 224/236 xe cam, 1.6 rr's, csi wp, msd 6al
Times in sig car weighs 3630 for those runs
#25
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
Ran my 95 Z28 yesterday at Toronto Motorsport Park.
Time was 11.57 @119 mph with 1:62 60ft. ( Car has run 1.59 60 ft. )
383 stroker, LT1 heads, Hydraulic Roller, A4 with 2800 stall.
Weight at track 3680#
Time was 11.57 @119 mph with 1:62 60ft. ( Car has run 1.59 60 ft. )
383 stroker, LT1 heads, Hydraulic Roller, A4 with 2800 stall.
Weight at track 3680#
#26
Re: lt1 guys post ur 1/4 mile times and mods and A4 or M6
Best 2 runs to date:
11/ 04= 13.02 @104/ 1.84 60 ft.
11/ 04= 13.07 @104/ 1.83 60 ft.
This was with a 2800 stall and 275/40/17 Nittos drag radials. I recently sent the TC back and upped the stall to 3200. Also, both runs were made with an open cutout in place of the cat. The rest of my mods are in the sig.
11/ 04= 13.02 @104/ 1.84 60 ft.
11/ 04= 13.07 @104/ 1.83 60 ft.
This was with a 2800 stall and 275/40/17 Nittos drag radials. I recently sent the TC back and upped the stall to 3200. Also, both runs were made with an open cutout in place of the cat. The rest of my mods are in the sig.