9.68 run is up........
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
for more pics and video check out below...
9.68 video in my 6speed is up on BMR's site!!!
http://www.bmrfabrication.com/FeatureCars/Tanner.htm
if you check out the above link you can see that badass A.R.E powered beast haulin' the mail down the track!
thanks to Wade(agostino racing team) for all the motor work and track support!!!
and Brett for helping me to transfer the power to the ground!!
9.68 video in my 6speed is up on BMR's site!!!
http://www.bmrfabrication.com/FeatureCars/Tanner.htm
if you check out the above link you can see that badass A.R.E powered beast haulin' the mail down the track!
thanks to Wade(agostino racing team) for all the motor work and track support!!!
and Brett for helping me to transfer the power to the ground!!
Thread Starter
Registered User
Joined: Dec 1998
Posts: 2,407
From: Windsor, Canada: Home of the FASTEST LT1 & LS1 6 spds :)
Grease,
that is pretty cool to see the wheels come up like that! i never powershift on spray!
even motor is not doable the motor spins up so fast i would peg the rev limiter. and believe me i am not afraid to pull on the short stick!
that is pretty cool to see the wheels come up like that! i never powershift on spray!
even motor is not doable the motor spins up so fast i would peg the rev limiter. and believe me i am not afraid to pull on the short stick!
Man taner looks like you had your hands full all the way down.
So what does day light look like? Hard to tell if you lost site of the track or not from looking at the photo's.
Either way bad *** run. Will your cage still be enough, ore do you have to expand?
So what does day light look like? Hard to tell if you lost site of the track or not from looking at the photo's.
Either way bad *** run. Will your cage still be enough, ore do you have to expand?
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



.
