5 point bar weight
What does a 5 point weigh about, in mild steel and in chromoly? (spelling)
|
Wolfe Racecraft shows the weight of their mild steel 5-point bolt in bar as 75-80#. They show a thinner wall chrome moly should reduce that by about 20#.
http://www.wolferacecraft.com/detail.aspx?ID=242 Thats consistant with what I saw with my chrome moly unit. I have a 6-point (custom, not Wolfe), with an extra X-brace between the rear supports, and it would have been about 100# in mild steel, but only 70# in chrome moly. |
Thanks Fred, The supporting vendor I went to, didn't have weights posted.
|
Many years ago when I installed a 6 point MS roll bar in my car, I weighed all the bars. Total weight was 70 pounds. A 5, 6 point bar needs to be made from 1-3/4" tubing. I now have a full cage in my car with the largest tube at 1-5/8". I have a lot of tubes for a full cage and have no idea what the total weight of the cage is. My race weight (driver, fuel etc) is 3060 pounds but then it's also a gutted out race car.
MS is easy to install by anyone with a MIG. CM needs to be TIG welded and not everyone has access to a TIG. |
Originally Posted by Stephen 87 IROC
(Post 4783877)
Many years ago when I installed a 6 point MS roll bar in my car, I weighed all the bars. Total weight was 70 pounds. A 5, 6 point bar needs to be made from 1-3/4" tubing. I now have a full cage in my car with the largest tube at 1-5/8". I have a lot of tubes for a full cage and have no idea what the total weight of the cage is. My race weight (driver, fuel etc) is 3060 pounds but then it's also a gutted out race car.
MS is easy to install by anyone with a MIG. CM needs to be TIG welded and not everyone has access to a TIG. |
All times are GMT -5. The time now is 03:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands