Does anyone out there have a Flow Vs Frequency table for a Z06/LS6/6.0L MAF?? The ones that I have are all running so rich my car stumbles like crazy, not to mention my BLMs are like -12 to -14

Mike

 

I really dont know much about this but isnt there some MAF translator thats suppossed to work? Or am I way off base here?

 

Well, the translator will work, but I've already got LT1 Edit so I'd rather just adjust the MAF Flow/Freq table than spend more money on another box of electronics.

Mike

 

just do a little trial and error with LT1 edit. i think a lot of MAFs read slightly different anyway so a custom MAF table works better than the stock Z06. start by taking off 2 gps thru the entire table and see what that does for you. just remember you HAVE you scale down the tables b/c the MAF is saying theres more air coming in than there actually is which is causing the PCM to dump in fuel...rich condition.

 

Yea bit trial an error only works so far when you're starting that far off. I got another table off the LT1 Edit mailing list so we'll see how that works... whenever the weather clears up around here...

Mike