No cyl. volume or fuel inj. flow rate in Fastchip program

Reply Subscribe

Thread Tools

Search this Thread

Jul 23, 2002 | 03:54 PM

robertf97

Thread Starter

Registered User

Joined: Feb 2002

Posts: 20

From: mt. carmel, tn

No cyl. volume or fuel inj. flow rate in Fastchip program

I just got Tunercat working/licensed yesterday and read my PCM, which was previously programmed by Ed Wright of Fastchip.

There no numbers for cylinder volume or fuel injector flow rate entered in my .bin file. Any guesses why this may be?

I lowered the fan speeds and reflashed the program and it works fine without these two constants. Also, I verified it doesn't need the old $EEB def file.

Just want to know if he's done something "special" that I should be aware of before I start altering it. Thanks.

------------------
Supercharged 94 Formula Coupe M6, 355ci LT1 10.2CR, 6 psi PD, 218/230/114, 1.6RR, 36lb/hr, TRW L2256F, PM rods, ARP rod bolts and 2 bolt main studs, mild port and polish, 1.94/1.50 Race Flo valves, MSD 6BTM, CSI electric WP, Ed Wright tuning, inline fuel pump, Pacesetter 1 5/8” mid length headers, MAC catback, Torque arm & SFC’s, AL DS, LCA’s, PHR, big *** sway bars

Jul 25, 2002 | 03:46 PM

JasonK94Z

Registered User

Joined: Mar 1999

Posts: 583

From: Moore, OK

Ed Wright does a lot of his programming using a hex editor. He does this to try and prevent people from editing his programs.

Jul 25, 2002 | 03:50 PM

White Tiger

Registered User

Joined: Mar 2002

Posts: 24

From: Ft. Laud., Fl

Quote:

<font face="Verdana, Arial" size="2">Originally posted by JasonK94Z:
Ed Wright does a lot of his programming using a hex editor. He does this to try and prevent people from editing his programs.</font>

Do you know when he started doing this "hex" editor thing?

I had him program my computer a few years back and major changes that I've tried to make have had little impact on my ability to lean the "richness" problem out.