Need 94 M6 stock tune.
Thread Starter
Registered User
Joined: Apr 2001
Posts: 369
From: Toronto, Ontario, Canada
Need 94 M6 stock tune.
Some **** clown programmed my PCM with an automatic tune, and reverse will work when I'm going ABOVE 5 km/hr, and won't below. :-0
Just need the file, and I'll start from there. Thanks guys!
Just need the file, and I'll start from there. Thanks guys!
Registered User
Joined: Feb 2000
Posts: 178
From: Toronto, Ontario, Canada
Re: Need 94 M6 stock tune.
I wonder who that was?
BTW... how did you figure out that i worked above 5km/hr.... must make it hard to get into reverse if you have to accel forward first :S
BTW2... on my Tunercats... in the Constant Table, there is a setting to Enable and Disable Reverse... at a certain MPH... maybe it would work just to adjust those settings without having to switch programs and re-enter all the data.
BTW... how did you figure out that i worked above 5km/hr.... must make it hard to get into reverse if you have to accel forward first :S
BTW2... on my Tunercats... in the Constant Table, there is a setting to Enable and Disable Reverse... at a certain MPH... maybe it would work just to adjust those settings without having to switch programs and re-enter all the data.
Last edited by C Man; Apr 16, 2006 at 11:12 PM.
Thread Starter
Registered User
Joined: Apr 2001
Posts: 369
From: Toronto, Ontario, Canada
Re: Need 94 M6 stock tune.
Originally Posted by C Man
I wonder who that was?
BTW... how did you figure out that i worked above 5km/hr.... must make it hard to get into reverse if you have to accel forward first :S
BTW2... on my Tunercats... in the Constant Table, there is a setting to Enable and Disable Reverse... at a certain MPH... maybe it would work just to adjust those settings without having to switch programs and re-enter all the data.
BTW... how did you figure out that i worked above 5km/hr.... must make it hard to get into reverse if you have to accel forward first :S
BTW2... on my Tunercats... in the Constant Table, there is a setting to Enable and Disable Reverse... at a certain MPH... maybe it would work just to adjust those settings without having to switch programs and re-enter all the data.
We can reprogram it? You have all the tools. Get over here and gimme my reference letter as well.
Thread Starter
Registered User
Joined: Apr 2001
Posts: 369
From: Toronto, Ontario, Canada
Re: Need 94 M6 stock tune.
Originally Posted by brutalbird
I have one you can have, but I don't see anyplace for me to place it as an attachment. Give me an email address and I'll send it along.
THanks dude!!!!!
Registered User
Joined: Sep 2002
Posts: 2,193
From: High Ridge, MO
Re: Need 94 M6 stock tune.
How does your reverse only work when you are going 5 km/hr? Do you mean that you can't push it over into reverse? You can overcome that solenoid that is in there. I have to do it everytime I use reverse, since I did an A4 to M6 swap and I don't have the pigtails for the computer system. You just have to push harder.
Benji
Benji
Thread
Thread Starter
Forum
Replies
Last Post
armedtrigger
LT1 Based Engine Tech
10
Feb 24, 2015 08:30 PM