any1 ever used one of the akm cables and found software to tune/scan codes with a mac? i have a mac, and am trying to buy one of the akm cables off of a member here and juz wanted to know if i could do anything with my macbook...thanks

 

bump...no1 has an idea?

 

You are a minority in the F-Body tuning world, maybe to only one asking about a MAC, probably why no response. Seems to me if you had a USB ALDL cable the interface is an industry standard. Your major problem would be a compatible driver plus all the free or low cost software to tune and log the ODB1 PCM's that have flash memory ('94-95 F-Body) is now at least 17 years old, and was written for Windows, and has had very little incentive to update. . In fact it's getting to be a PITA to even run the stuff on the newer OS coming out. To make things easier I keep an ancient Windows 95 laptop running that's dedicated to just tuning my car. No network or OS updates it's just locked in time like a vault with old software that never changes.

 

damn...sucks to b a mac owner

 

You aren't going to find much in the way of support for Macs in the tuning world. I don't know much about Apple, but I suppose if you were to load Windows XP or 7 on it as a second OS, you could probably use it for tuning that way.