I have a 96 Z28 and I just got it. It has these mods installed, Comp Cam 306
Dual Coil Valve Springs/Pushrods
LT4 Lifters
G2 Cold Air Intake
Airfoil
Flowmaster
and I believe the MAF is stock.
The car runs fine but Idle is a little wierd to me and it has a little bit of a bad throttle response. I was thinking with these mods that I should get the RPM's tuned etc. and I'm about to put new plugs and wires and I also though maybe a MSD Ignition would do the job. If anyone has any tips for me or what I should purchase to make it run smoother with these mods plz help. Or if you think the combination of these parts is wrong. I have looked it up and it checks out. The cam has a .510/.540 Lift and you have to run the dual valves etc. Maybe someone could recommend a tuning device for the ECU. I was just wanting some tips thnx.

 

have you had anyone tune the car yet. if not im about a hour and a half away from you. are you willing to drive. if you are i can tune the car for you. i can possibly do it this weekend on sunday.

you cant do what you need done with hypertech you will need someone to tune it for you that has tunercat or lt1edit. like i said i have tunercat and can do it for you.

let me know.

by the way theres some power left in that car and it can be found with tunning.

 

97Z-M6,

You are alright......


Thanks for helping out a fellow F-body buddy.

Gotta love the game to enjoy playing it!

Later,
Botch

 

i just noticed you have a 96 thats obd2 i cant do obd2 sorry.

 

Can you tune my 95, its obd1?