Anyone have starting files for my setup in the sig? I would appreciate it so I can get to a dyno to tune it up!!

Thanks !~

------------------
93 Purple grey TA, WS6 chrome rims, Firehawk hood, hypercoil spring, kyb AGX's. Hotcam fully ported heads, mac headers etc..., 3200 viglante, rebuilt tranny all the good stuff! 12.69 @105.88, 1.74 60ft with Nitto's

 

Turbo People in Hastings NY will be able to help you. Ask for Job Spetter Jr. Tell him Lupe from San Antonio sent ya! He will be a big help, trust me. One of the best in DFI if not the best.
914-478-1727

GN

------------------
2001 Toyota 4Runner Limited
2001 Chevy 2500HD Crew 4X4
94 Z28 Blown/Aftercooled 355, DFI, etc..

 

I know this post is a bit old, but if you're still looking for a stock file to start with I had the help of ChowZ28 from a forum about 6months ago. I've been running this tune: http://numb.voxel.net/calmap/files/UNVRSL/chowz28
for about 6 months. Chow said it was a good start for a stock `95 WS6/Z28 with the accel dfi gen6. It runs rich as hell on a stock setup, but it's got my car running like a bat out of hell and it helped me fix all the ignition gremlins i had before. There's a bit of work to be desired on the ignition map, but it's a good place to start. By this time you've probably already got your DFI tuned so it's no good but i'll put this here to help those looking for a good place to start with a stock LT1 and the accel dfi.
thanks to ChowZ28 for the help again!