Need Help Finding Parts!!
08-26-2003, 12:57 PM
#1
Registered User
Thread Starter
Join Date: Aug 2003
Location: Harrisburg, PA
Posts: 3
Need Help Finding Parts!!
Alright here is my problem i am in the process of restoring a 79 Z28 w/ hurst T-Tops. I need to know of a good place to go to get things like some good tail light assemblies, door hinges, panels, and a rear deck. Not to mention some clear cut wiring diagrams for the whole car. You see someone who owned this before me covered my interior panels w/ some nasty **** carpet, go figure. Not to mention destroying my center console and leaving me with a guage cluster thats shot. engine and driveline not a concern yet, everything else is unfortunately. You help is appreciated.
Thanks - George
Thanks - George
08-26-2003, 05:45 PM
#2
Registered User
Join Date: Jul 2001
Location: Kalamazoo-home of...nothing.
Posts: 39
Everyone will tell you www.nastyz28.com , so try www.nastyz28.com
****-a-delic man! Did they go all the way & put the little dingle ***** in there too?
****-a-delic man! Did they go all the way & put the little dingle ***** in there too?
08-26-2003, 07:49 PM
#3
Registered User
Join Date: Aug 2003
Location: La Porte, Texas
Posts: 66
I'm parting out a 1980 Z let me know all the parts that you need and I will get it for you. I'm also on www.nastyZ28.com
08-26-2003, 11:21 PM
#5
Registered User
Join Date: Sep 2002
Location: Oakland, California
Posts: 9,710
Also try http://www.classicindustries.com and http://www.yearone.com
08-27-2003, 01:57 PM
#6
Registered User
Thread Starter
Join Date: Aug 2003
Location: Harrisburg, PA
Posts: 3
Thanks guys, I appreciate your help. I just ordered some catalgues through the websites you all and others referred me to. For those who are offering to sell me parts here is a list of what i need:
seats (preferably black leather or cloth)
GloveBox Liner
Wiring (through further invsetigation my wiring makes no damn sense)
Tail Lights
Complete AC assembly (not sure if its worth it w/ t-tops? opinions are welcome)
Door Panels (black preferably)
Interior t-top trim
Trunk Lid
Floor Pans
E-mail me at Poolshrk17@aol.com if anyone could help me out.
Thanks Again
seats (preferably black leather or cloth)
GloveBox Liner
Wiring (through further invsetigation my wiring makes no damn sense)
Tail Lights
Complete AC assembly (not sure if its worth it w/ t-tops? opinions are welcome)
Door Panels (black preferably)
Interior t-top trim
Trunk Lid
Floor Pans
E-mail me at Poolshrk17@aol.com if anyone could help me out.
Thanks Again
08-28-2003, 10:02 PM
#7
Registered User
Join Date: Nov 2001
Location: Clearwater, FL
Posts: 338
I'm surprised that nobody mentioned it yet, but NPD is a pretty good source for 1st and 2nd gen Camaro stuff. You can order a free catalog at www.npdlink.com.
08-31-2003, 03:18 PM
#8
Registered User
Join Date: Mar 2001
Location: Orem, Utah
Posts: 36
Junkyards are always an option. There's a chance that one around in your area will have what you need. There's not many more places to list, after the ones previously listed. I always use Classic Industry for my stuff. They might be a little expensive, but they have almost everything! From what I can see, they've got the:
Seat
Floor Pans
Trunk Lid
As for the wiring, check out http://www.painlesswiring.com/ I've heard several good things about them from car mags and a friend or two.
Seat
Floor Pans
Trunk Lid
As for the wiring, check out http://www.painlesswiring.com/ I've heard several good things about them from car mags and a friend or two.
Thread
Thread Starter
Forum
Replies
Last Post
bonniew
Events and Cruise Spots
0
01-18-2015 01:14 PM
Sarahrope64
LT1 Based Engine Tech
0
11-27-2014 11:17 AM