Hello there!
As some of you might have noticed i am a newbie Camaro owner.
I saw that cruise control was implemented with the -75 Camaro.
Does anybody have cruise control or know where its placed on the board?

Hasta!

 

In my 78 Trans Am, it's on the right side, in front of the power brake booster. It is a highly primitive box with a bunch of vaccuum lines coming out of it. Try looking there.



------------------
1978 Trans Am, ENGINE FINALLY DONE! Will be running soon! Pontiac 400 + .030", milled/decked 9:1 comp., High Energy 268H cam, comp cams rr's, valve job, balanced, edelbrock intake/carb, hooker headers, dual exhaust, flowmaster 40 series 2 chambers, B&M holeshot 2000 TC, B&M ratchet shifter, march pullies and K&N/Xstream. http://www.cardomain.com/member_page...=225185&page=1

 

got cruise on my '77 as well (dunno if it works, haven't driven it yet)
it seems to be a set and go thing. There is only one pushbutton on the end of the turn signal stalk to set the cruise - no accel, decel, resume, coast, etc like modern cruise.

 

Just thought I would throw this out there.. if you want a more modern cuise, JC Whitney sells them starting around $100.. I have installed two, one on an 86 Monte Carlo, and one on my wife's 97 Grand Am, they are small, and work like a charm..

------------------
Texlurch - 68 Camaro-LT1 w/Hot Cam, TT & TIC coming soon!
" a little spray never hurt anyone, spank you very much!"

http://camaroz28.cardomain.com/id/texlurch