WTB: 94-02 M6 F-body.
#1
WTB: 94-02 M6 F-body.
Probably a long shot but I'm looking for an M6 LT1 or LS1 F-Body. I'm not picky, high mileage is fine, slightly rough paint is fine as well. Don't care about options, color, Camaro or Firebird. I'm looking for a project car! Preferably someone within driving distance of the Odessa/Midland, TX area.
#3
I have a 2002 M6 but its not a project car (well I guess it could be if you want it to be!). The car is located in northeastern, PA (near Easton). I'm asking $12,000 (hence why I said its not a project car) but if you are interested just shoot me an email and I'll give you anything else you need. Info, pics, etc.
danporcaro@hotmail.com
danporcaro@hotmail.com
#5
I am in Phoenix Arizona, not sure how far that is from you.
I have a 1994 Camaro Z28
it is a gray green hardtop
suspension
hal qa1 type r's up front, hal qa1's in rear.
Hal springs in the front, stock z28 springs in rear as well as air bags (not the hydraulic kind, the drag bag ones)
pa racing tubular crossmember
chromoly pan hard rod with rod ends
spohn lca's
chromoly upper links, ladder bar style set up.
Ls1 front brakes
bmr tubular sub frame connectors
rear mounted battery with nhra legal kill switch
Drivetrain
6 speed transmission
gmr ripper shifter
Spec 4 clutch
Ford 8.8 rear end
Mac girdle
Ford racing 3.73's
Ford Racing posi unit
Arp longer studs in rear
Gm long studs in front
drive shaft safety loop
Motor
Gm847 cam
Agostino Racing heads
comp pro mag rockers, and all the other good stuff to match the head/cam seutp
CSR e-water pump
Vented opti conversion
cloyes double roller timing chain
true duals exhaust with magnaflow 4x9's AND moroso spiral flo's (pretty quiet set up)
moroso cai
pacesetter long tubes
azsm 52mm throttle body
crane hi 6 box and coil
edit: forgot to add the ford svo 42lb injectors and walbro 255
I am pretty sure there is more that I have done to the car, its kind of been a collective project I have had for a few years. It's funny because I actually finished all the bugs out of it yesterday. Just pulled the oil cooler because it clogged up on me and rebuilt the opti on it.
I also have 2 full set ups of rims and tires, 4 of the rim/tires are brand new tires, 2 are worn, 2 have drag radials. The current set up you see has 20 miles on it. I worked on the car throughout college thinking it would be a cool car to have after, now I am so busy with working and trying to go to a graduate school that I have no motivation to drive it, nor do I really want too. I have gotten used to driving my truck. I also have 1 extra intake, 1 extra lt1 block, and a set of weld pro star's with slicks and skinnies that have 3 drag passes on them. If I sold the car I would use the money to trade my 1/2 ton in and use that and the cash as a down payment on a 1 ton diesel. my truck recently has been inhibiting me in the line of work I do and a bigger truck would make me more money.
If you have any questions or think you might be interested feel free to give me a call. 4802054453, my name is Christian.
picture of said ladder bar set up
picture of car with pro stars on
I have a 1994 Camaro Z28
it is a gray green hardtop
suspension
hal qa1 type r's up front, hal qa1's in rear.
Hal springs in the front, stock z28 springs in rear as well as air bags (not the hydraulic kind, the drag bag ones)
pa racing tubular crossmember
chromoly pan hard rod with rod ends
spohn lca's
chromoly upper links, ladder bar style set up.
Ls1 front brakes
bmr tubular sub frame connectors
rear mounted battery with nhra legal kill switch
Drivetrain
6 speed transmission
gmr ripper shifter
Spec 4 clutch
Ford 8.8 rear end
Mac girdle
Ford racing 3.73's
Ford Racing posi unit
Arp longer studs in rear
Gm long studs in front
drive shaft safety loop
Motor
Gm847 cam
Agostino Racing heads
comp pro mag rockers, and all the other good stuff to match the head/cam seutp
CSR e-water pump
Vented opti conversion
cloyes double roller timing chain
true duals exhaust with magnaflow 4x9's AND moroso spiral flo's (pretty quiet set up)
moroso cai
pacesetter long tubes
azsm 52mm throttle body
crane hi 6 box and coil
edit: forgot to add the ford svo 42lb injectors and walbro 255
I am pretty sure there is more that I have done to the car, its kind of been a collective project I have had for a few years. It's funny because I actually finished all the bugs out of it yesterday. Just pulled the oil cooler because it clogged up on me and rebuilt the opti on it.
I also have 2 full set ups of rims and tires, 4 of the rim/tires are brand new tires, 2 are worn, 2 have drag radials. The current set up you see has 20 miles on it. I worked on the car throughout college thinking it would be a cool car to have after, now I am so busy with working and trying to go to a graduate school that I have no motivation to drive it, nor do I really want too. I have gotten used to driving my truck. I also have 1 extra intake, 1 extra lt1 block, and a set of weld pro star's with slicks and skinnies that have 3 drag passes on them. If I sold the car I would use the money to trade my 1/2 ton in and use that and the cash as a down payment on a 1 ton diesel. my truck recently has been inhibiting me in the line of work I do and a bigger truck would make me more money.
If you have any questions or think you might be interested feel free to give me a call. 4802054453, my name is Christian.
picture of said ladder bar set up
picture of car with pro stars on
Last edited by romoranger; 01-25-2009 at 06:38 PM.
#7
95 roller or 93 firehawk
i have a ttop, 95 a4 roller with 60,000. the rollcage has been finished as well as subframe connectors. its pretty clean, and i have a 98 formula with 17000 miles on it that can be a donor for any parts, including the ls1/t56.the formula might be repairable too, hit in the back needs both quarters and lots of other stuff... and i might sell my 93 firehawk #134. black, 6spd, cloth,25000 miles.
#9
1996 Clean Z28/SS
This is the fastest and cleanest SS/Z28 you will find for the money! Let me give you the run down: BBK 58MM throttle body, BBK 58MM mass air, K&N Forced Air Setup, Ported&Polished Heads, Meziere Electric Water Pump, Mach1 Underdrive Pulleys, Full Length Longtube Headers, Stage 2 Built 4l60e Transmission, 3.55 Gear, Professional Roll Cage Installed and I'm sure I forgot something but you get the point its right and ready! And not to mention it can drive anywhere including the highway without any problems and no leaks! Price is negotiable but we know we are under priced already :-), Clear title in hand and ready to sell give me a call 770-572-5087 anytime P.S leave a message if no answer probable at work or simply did'nt hear phone ring! God Bless and Thank You
http://atlanta.craigslist.org/cto/1110627096.html
http://atlanta.craigslist.org/cto/1110627096.html
#10
I'm not near you but:
https://www.camaroz28.com/forums/sho...d.php?t=685311
https://www.camaroz28.com/forums/sho...d.php?t=685311
#11
#12
Thread
Thread Starter
Forum
Replies
Last Post
96SilverRam
Parts For Sale
2
08-30-2015 10:46 AM
purduetwinkie
Parts Wanted
5
12-22-2004 12:19 PM