i havet decided for sure but am heavily considering selling my baby.

1994 white z28 a4

Here is the mod list.

Engine-

Engine has roughly 4000 miles on it

All machine work and assembly of short block done by performance shop in Newark OH
stock bore
stock stroke (block only has 12,000 miles on it)
Scat crank
TRW speed pro forged pistons
Eagle forged I beams
Car-tek stage 2 heads
Comp 236/242 cam 114LSA
37lb bosch injectors fed by 255 intank pump
grantelli MAF
MAC mid length headers & Y-pipe
Mufflex 4" system with the dual 3" exit
New felpro and mr gasket gaskets
ARP head bolts and main bolts
Mallory 685 box
NOS wet kit

I put all new stuff on this engine. It has a newer opti and water pump as well.


Transmission - approx 6000 miles

Built TCI tranny

I blew up the strock one and bought the best of the best TCI stuff and had my buddy at Bow-tie transmission in columbus ohio put it togeather. The only thing stock in this tranny is the imput shaft.

They stall that is in it is kind of small i thought i would be using a different cam when i put it in but had a last minute change. Its a TCI 2600 stall.


Body 12x,xxx miles

The car has a cage in it and 5 point harnesses. The doorbars have not been installed yet but that is not an issue. The rear has a 4.10 gear and is still a 10 bolt. The car has been lowered and i have LCA's sub frame connecters and panhard waiting to go on. All but the sub frames and Spohn. Ther car hs radial tires on it and all of which are in great shape.

I am just loosing interest in it and have been for awhile. I though it would come back around now that its summer but i bought a gsxr 1000 and on nice days i am riding that so the camaro sits. Its really a nice car.

The only that would need to be done would be to figue out the fuel issue and finish having it tuned. Car rund and drive great now, it just acts up sometimes and back fires. Acts like it is running out of gas. I just started a fulltime job and i am a full time student. I am just over whelmed and i figure i could use the money to pay down the bike and get a daily driver.

If you have any questions just ask...like i said not 100% sure i am selling but i have been considering it heavily.

 

Price? ET?

 

edit

 

dont have an ET but car should be making just over 600 HP with the spray. As far as price goes i would like 8000.

also have parts that come with it like slicks, and another bottom end. etc.

 

location?