I have a 1992 Camaro RS w/ 3.1L V-6 that doesn't run. Have clear title. $1000. This car would be awesome with the 283 and TH350 listed below. I know most people are into cubic inches, but due to the short throw of the 283 crank (3.00"), these motors make great high RPM screamers. This is an all original 1964 Impala Power Pack 283. Block #3834810 w/ I.D. #T02I8D, heads #3795896 (2 sets), intake #3840905. Research it, it's legit and never been bored, etc. Sorry, 283 and TH350 SOLD

SOLD 400sbc: bored .030" over (406 cubic inches), align honed, balanced
-camel hump heads ported to max (needs biggest port gaskets available) and big valves
-6" rods w/ Speed-Pro flat-top pistons (10.5:1)
-1.55" valve springs up to .550" lift
-1.6" roller rockers
-Federal-Mogul Blazer camshaft (.480"/.480")
-Speed-Pro forged flat top pistons
-Total-Seal gapless piston rings
-GM pink rods
-SCAT crank
-Edelbrock Air-Gap intake
-Edelbrock Performer carb
-ARP fasteners

Rebuilt TH350 trans. SOLD

17" American Racing 200S rims (2 w/ 275/45/17 tires Kuhmo 755s) SOLD
283c.i. small block (needs rebuild) SOLD

L98 heads off TPI Camaro SOLD

60 degree 700r4 (needs rebuild) SOLD

4L60E from 1994 Camaro (needs rebuild) $200

and finally......

1968 Chevy C10 pickup w/ '86 Suburban frontend w/ disc brakes, Pacer 15" aluminum 5 star rims, rolled rear pan, new radiator, power brakes booster and Grant steering wheel. $800. Also, have listed below things that could be sold along with truck or at prices listed:
-new guage cluster w/ white faced guages $75
-3"/4" lowering springs $75
-lowered panhard bar $50
-3.73 posi rear $150
-new tailgate $75
-custom fiberglass console (wrapped in leather) w/ 12" subwoofer enclosure
$100
-bucket seats from 2002 Grand Am (including brackets) $100
-chrome vent windows $25
-class III trailer hitch $50


Also, have a 1987 S10 Blazer 4X4. Great little SUV in good shape. $1500.

cjdparsons@yahoo.com OR 843-209-8587

 

ttt

 

ttt

 

ttt

 

ttt