FS: 71 Camaro w/ rollcage
FS: 71 Camaro w/ rollcage
1971 Camaro
This was originally a 307/auto, it's been swapped to a 350/M21 4 speed.
Engine has been recently rebuilt and is in good shape, has a bit of a cam, HEI ignition, edelbrock intake, holley 600 cfm 4 bbl, and headers w/ full dual exhaust. Dressed up with some chrome.
Tranny is an M21 4 speed, shifts good but I think it could use some bearings, it makes a bit of noise.
Has alot of new parts including tires, water pump, windshield, half the exhaust, etc
The body/chassis has alot of work and time into it. The front firewall has been closed up and a rear firewall added, fuel cell, the cage goes from bumper to bumper and ties into the body/chassis all over the place. The fender flares are all steel. The paint is flat black. No rust anywhere that I know of.
I wanted to put a custom interior into it, stick a lower geared rear end in for some more off the line go and make a street cruiser then eventually start racing it but I don't have the time to maintain and build 2 cars so it's gotta go.
I'm looking for $4500




This was originally a 307/auto, it's been swapped to a 350/M21 4 speed.
Engine has been recently rebuilt and is in good shape, has a bit of a cam, HEI ignition, edelbrock intake, holley 600 cfm 4 bbl, and headers w/ full dual exhaust. Dressed up with some chrome.
Tranny is an M21 4 speed, shifts good but I think it could use some bearings, it makes a bit of noise.
Has alot of new parts including tires, water pump, windshield, half the exhaust, etc
The body/chassis has alot of work and time into it. The front firewall has been closed up and a rear firewall added, fuel cell, the cage goes from bumper to bumper and ties into the body/chassis all over the place. The fender flares are all steel. The paint is flat black. No rust anywhere that I know of.
I wanted to put a custom interior into it, stick a lower geared rear end in for some more off the line go and make a street cruiser then eventually start racing it but I don't have the time to maintain and build 2 cars so it's gotta go.
I'm looking for $4500




Re: FS: 71 Camaro w/ rollcage
The previous owner did the flares. They seem to be a love it or hate it thing, they're pretty well done tho. I think he used a piece of tubing to make the outer edge and then welded sheet steel in between the tubing and body and then smoothed up the joints.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
CARiD
Supporting Vendor Group Purchases and Sales
0
Jan 14, 2015 04:00 AM
ChrisFrez
CamaroZ28.Com Podcast
1
Dec 21, 2014 09:47 PM
ChrisFrez
CamaroZ28.Com Podcast
1
Dec 15, 2014 03:09 PM



