Feeler-1996 Formula 6spd
1996 Formula 6spd
No longer a feeler this is for sale!
1996 Firebird Formula LT1 5.7L V8 w/ T56 6spd transmission and 85k miles on it. The motor has 60k miles on it with the top end being refreshed or brand new with high quality performance parts. All the maitenence items are brand new including all gaskets, plugs, wires, water pump, timing set and brand new clutch. Car starts and runs but a tune for the added modificatins is needed for full potential. Has chrome vette wheels with new nittos up front and mickey thompson drag radials on back. Side markers and newer honeycomb taillights have been tinted. Car needs some paint work on front bumper and has a fist sized dent on driver quarter(previous owner) but is other wise in good condtion. With the current setup ive been told the car should make 350-360rwhp so thats 420 hp at the crank!!! Ask for a full parts list. Price is $6000 but is negotiable or will trade for another rwd car i.e. 240sx or s10 plus some cash.
List of mods but like always sure im forgetting a few things.
MOTOR
Lloyd Elliot/Bullet Cams 226/234 .565/.565 109 LSA
Patriot Gold Valve Springs
Comp Cams Pro Mag 1.6 roller rockers 7/16
Comp Cams 7/16 rocker studs
LS7 Lifters
Trickflow 7.2in Pushrods
Comp Cams Guid Plates
Pro Gear Timing Chain
Meizere EWP
DRIVETRAIN/SUSPENSION/WHEELS
Ram Powergrip HD clutch
Corvette Y2k wheels w/ Nitto NT555 extreme zr(front) Mickey Thompson ET street drag radials(rear)
Baer Eradispeed 13.5" brake kit
QA1 coilovers
Tubular K member
Tubular Upper and Lower Arms
Larger front and rear sway bars
QA1 Adjustable rear shocks
Eibach pro kit rear springs
Tubular lower control Arms
Tubular Panard Bar
EXHAUST
LPP Stainless 1 3/4" to 1 7/8" headers
LPP Stainless catless y-pipe
Aero turbine AT303 Stainless muffler and turn down
Current pics





Radio block off i made

And an untuned idle
http://smg.photobucket.com/albums/v1...t=106_0016.mp4
1996 Firebird Formula LT1 5.7L V8 w/ T56 6spd transmission and 85k miles on it. The motor has 60k miles on it with the top end being refreshed or brand new with high quality performance parts. All the maitenence items are brand new including all gaskets, plugs, wires, water pump, timing set and brand new clutch. Car starts and runs but a tune for the added modificatins is needed for full potential. Has chrome vette wheels with new nittos up front and mickey thompson drag radials on back. Side markers and newer honeycomb taillights have been tinted. Car needs some paint work on front bumper and has a fist sized dent on driver quarter(previous owner) but is other wise in good condtion. With the current setup ive been told the car should make 350-360rwhp so thats 420 hp at the crank!!! Ask for a full parts list. Price is $6000 but is negotiable or will trade for another rwd car i.e. 240sx or s10 plus some cash.
List of mods but like always sure im forgetting a few things.
MOTOR
Lloyd Elliot/Bullet Cams 226/234 .565/.565 109 LSA
Patriot Gold Valve Springs
Comp Cams Pro Mag 1.6 roller rockers 7/16
Comp Cams 7/16 rocker studs
LS7 Lifters
Trickflow 7.2in Pushrods
Comp Cams Guid Plates
Pro Gear Timing Chain
Meizere EWP
DRIVETRAIN/SUSPENSION/WHEELS
Ram Powergrip HD clutch
Corvette Y2k wheels w/ Nitto NT555 extreme zr(front) Mickey Thompson ET street drag radials(rear)
Baer Eradispeed 13.5" brake kit
QA1 coilovers
Tubular K member
Tubular Upper and Lower Arms
Larger front and rear sway bars
QA1 Adjustable rear shocks
Eibach pro kit rear springs
Tubular lower control Arms
Tubular Panard Bar
EXHAUST
LPP Stainless 1 3/4" to 1 7/8" headers
LPP Stainless catless y-pipe
Aero turbine AT303 Stainless muffler and turn down
Current pics





Radio block off i made

And an untuned idle
http://smg.photobucket.com/albums/v1...t=106_0016.mp4
Last edited by Verz; Sep 16, 2010 at 08:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
tommalcolm
Computer Diagnostics and Tuning
2
Sep 11, 2015 03:39 PM



