Please send pics to JUSTJEEPS@HOTMAIL.COM

 

hey dan,...i'm located in westchester, NY....the car has no leaks at all....most of if not all the cooling hoses have been replaced within the last few months...i have not used the a/c system in awhile but it also was replaced when the new motor went in...i'm pretty sure all the a/c hoses are in ok shape but i'm not 100% sure cause i never got a chance to check every single one ....i did intend on changing the oil pan due to the fact that it's just the stock pan massaged to fit the stroker crank....whoever buys the car can stick w/ that...but i was planning on using a moroso or milodan unit better suited to the car's off the line habits...as far as rattles..the car has a a mostly drag suspension...and catless exhaust...so it's not the quietest on the inside...but the dash does not rattle or or buzz or anything..especially since i put in the subframe connectors..if you have any other questions let me know....also i'd be willing to work with whoever bought this car to get it as close to where they live as possible...if the car is purchased within the next few weeks or so..i'll even deliver it myself as long as it's on the east coast...
thanks to everyone for your interest
Steve

 

Here's a COMPLETE list of everything i have in this car right now....as you can see there's alot

SUSPENSION/WHEELS/BRAKING
17x9." 10-spoke SS rims
BFG G-force KDW tires
Baer-Claw Track Front Braking Kit -2 piston 13" slotted rotors and stainless lines
Baer Rear Rotors 11" w/ high performance brake pads
Spohn Front Sway Bar w/ poly bushings(off car right now i can put back on)
Spohn 1-inch Rear Sway Bar w/ poly bushings
Spohn Adjustable Lower Control Arms -Poly/Spherical
Spohn Adjustable Torque Arm for long tube headers w/ Drive Shaft Loop-Spherical
BMR Adjustable Panhard Rod
BMW Tubular Subframe Connectors-welded in
HAL 12-way "R" Drag shocks (fixed 90/10 w. adjustable rebound)
Competition Engineering Rear 3-way Adjustable Drag Shocks(50/50,40/60.30/70)
HAL Front Drag Springs
Stock Camaro Rear Springs
Prothane Poly Trans Mounts
Prothane Poly Motor Mounts
DRIVELINE
T-56 6-Speed Transmission
Pro 5.0 Shifter
Spec Stage 3 Clutch
Fidenza Aluminum Flywheel
Spohn Heavy Duty Driveshaft
Moser 12-Bolt Rearend w/ 4.11 gearing,33-spline axles, c-clip eliminators and ABS
INTAKE/ENGINE/EXHAUST/IGNITION
396 ci LT1 Motor
K&N Fipk Intake cold air intake system
Arizona Speed And Marine 58mm "MonoBlade" ThrottleBody
Ported Stock Lt1 Intake Manifold to match Monoblade and Ported Cylinder Heads
Ported Stock Casting Lt1 Cylinder Heads(Ported to go w/ Stroked Bottom End@ SpeedPartsInc)
Comp Cams 290HR-12 Hydraulic Roller Camshaft all specs on compcams.com
Comp Cams Springs/Valves/Lifters/Roller Rockers(i believe 1.6's)
J/E Forged Pistons
SRP Forged Connecting Rods
Callies Forged Crankshaft(i think this one is a dragonslayer)
GM Heavy Duty Timing Set
Heavy Duty Oil Pump/Pickup
Stock WaterPump
Stock Oil Pan
Stock Valve Covers(Engine Defintley looks like a sleeper..till u start it up)
Bosch 42lb Fuel Injectors
Aeromotive Adjustable Fuel Pressure Regulator
Walbro 255lph Inline Fuel Pump
MSD Digital 6 Ignition w/ Dual Stage Rev Limiter, Timing Retard, and Tach Output
MSD Blaster High Output Ignition Coil
Taylor Over the Valve Cover Ignition Wires
NGK TR-55 spark plugs
March Underdrive Pulleys
High Output Alternator
High Output Starter
New High-Flow Radiator
160* thermostat
New Cooling Hoses
New A/C Unit
Earl's Header and Y-pipe Gaskets aluminum w/ carbon inserts
Jet-Hot Ceramic Coated Headers(hookers but from jet-hot)
Jet-Hot Ceramic Coated Y-pipe
Magnaflow Exhaust
o2 extenders
New Bosch o2 sensors
Lt4 Knock Module
New Knock Sensor
PCM tuned by PCM For Less
EXTERIOR
Medium Quasar Blue Finish aka Metalic Blue
Black Hardtop/Mirrors
Clear Front Turn-Signals
Headlight Buckets/Grill Area Painted Gloss Black(as opposed to the stock flat black)
Carbon Fiber Rear CAMARO inserts
Rear Hatch Tinted
INTERIOR
Charcoal Grey Cloth
Z28-Logo Floormats
Z28-Logo Billet Shift-****
AutoMeter Phantom Tachometer w/ Amber Shift Light...mounted on A-pillar
Currently the Rear Seats are out of the car in my garage but i can re-install them if someone wants
EXTRA'S
I will Also be Including:
1 pair of stock "salad shooter" camaro rims w/ Hoosier Quick Time Pro DOT-Legal Slicks
1 pair of Hawk HP rear brake pads

Complete Long Block of Engine Built at Speed Parts Inc. Elmsford,NY (914) 592-9030
any specs i missed on the engine itself could be found through them

 

Bump

 

Any interest in a heavilly modded 95 T-Bird that has also been lowered on 18's?

 

sorry..no interest in the t-bird...didn't you get my reply to your email??

 

Nope no reply...thanks though

 

really?..i responded to the email..i wonder why it didn't go through...sorry for any confusion...if you end up sellin the t-bird and are still interested...let me know

 

bump..car hits ebay this weekend

 

Car is Now on Ebay....w/ plenty of pics inside and out....

http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MESE:IT

 

just thought u guys should know..the reserve is MUCH lower than the price i was asking when originally listed on here....school starts end of April..so need to sell ASAP...

 

only one week left....

 

would you ever trade it for a 99 z28 with 43k miles, brand new midnight blue paint? i can email you the pics, thanks

 

i would've possibley considered that trade if it included some cash too and if it was before i put the car on ebay...it's a little too late now..but let me see some pics to MrDisturbedz28@aol.com....i have a friend that might be interested

 

i have pics of the motor now for those that were interested email MrDisturbedZ28@aol.com