97 Z28 for sale
10-10-2010, 10:45 AM
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Savannah, Ga
Posts: 610
97 Z28 30 Anniversary w/houndstooth - SOLD
SOLD
1997 30th Z28, A4, white/orange, houndstooth, t-top car. It has about 1400 miles on rebuilt motor. Mods:
Walk around video
Rebuilt heads – by Sauls Cylinder Head, Inc. in Savannah, Ga.
Beehive springs
Crane Cams Gold Race 1.6 S/A 3/8” RRs
Trick Flow hardened pushrods
Tri-metal 780 bearings
CC503 Cam
Moly piston rings
160 degree thermostat
Cloyes double roller timing set
CSI/CSR EWP
Cold air intake
K&N air filter
24# SVO FIs
Holley FPR
58mm BBK throttle body
TB bypass
Intake ported for 58mm TB with runners ported to Felpro gaskets
Racetronix 255 fuel pump w/harness
CAT/EGR delete
JetHot LT headers
JetHot coated Hooker y-pipe
Flowmaster catback
Jegster SFCs
Spohn LCAs
TByrne panhard bar
Eibach Sportline springs
External tranny cooler
Moser 12-bolt, 373 gears – 5,000 miles on it
Silver GM ZR1s up front with new rubber
Silver w/polished lip 17x11 ZR1 replicas in rear with 315/35/17 DRs
Auto Meter Phantom Tranny Temp gauge
Auto Meter Phantom Air/Fuel gauge with left/right bank switch
White face gauges
OBDI PCM
I’m sure I’ve forgotten about some stuff. $6700 OBO
1997 30th Z28, A4, white/orange, houndstooth, t-top car. It has about 1400 miles on rebuilt motor. Mods:
Walk around video
Rebuilt heads – by Sauls Cylinder Head, Inc. in Savannah, Ga.
Beehive springs
Crane Cams Gold Race 1.6 S/A 3/8” RRs
Trick Flow hardened pushrods
Tri-metal 780 bearings
CC503 Cam
Moly piston rings
160 degree thermostat
Cloyes double roller timing set
CSI/CSR EWP
Cold air intake
K&N air filter
24# SVO FIs
Holley FPR
58mm BBK throttle body
TB bypass
Intake ported for 58mm TB with runners ported to Felpro gaskets
Racetronix 255 fuel pump w/harness
CAT/EGR delete
JetHot LT headers
JetHot coated Hooker y-pipe
Flowmaster catback
Jegster SFCs
Spohn LCAs
TByrne panhard bar
Eibach Sportline springs
External tranny cooler
Moser 12-bolt, 373 gears – 5,000 miles on it
Silver GM ZR1s up front with new rubber
Silver w/polished lip 17x11 ZR1 replicas in rear with 315/35/17 DRs
Auto Meter Phantom Tranny Temp gauge
Auto Meter Phantom Air/Fuel gauge with left/right bank switch
White face gauges
OBDI PCM
I’m sure I’ve forgotten about some stuff. $6700 OBO
Last edited by Savannah Dan; 11-02-2010 at 05:07 PM. Reason: Sold
10-23-2010, 10:15 AM
#3
Registered User
Thread Starter
Join Date: Sep 2003
Location: Savannah, Ga
Posts: 610
The car is getting a front end alignment today. Never got it aligned after pulling the motor out of the bottom to do the build. Figured I better go ahead and get it done since I just put new tires on the front.
Ordered new stripes for it yesterday.
Ordered new stripes for it yesterday.
Last edited by Savannah Dan; 10-23-2010 at 10:23 AM.
10-29-2010, 01:08 PM
#10
Registered User
Thread Starter
Join Date: Sep 2003
Location: Savannah, Ga
Posts: 610
Unfortunately the only thing I can trade it for is cash. 
I have 3 F-bodies, my DD, my wife's DD, a 22' camper, a 22' boat, and a 12' boat at the house. Two of F-bodies, both of my '97 Z28s, and a boat gotta go. 
Thanks for the interest though.
I have 3 F-bodies, my DD, my wife's DD, a 22' camper, a 22' boat, and a 12' boat at the house. Two of F-bodies, both of my '97 Z28s, and a boat gotta go. Thanks for the interest though.
Thread
Thread Starter
Forum
Replies
Last Post
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
12-03-2014 12:30 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
12-01-2014 08:08 AM