94 Z-28 / hi-po eng. $7200
94 Z-28 / hi-po eng. $7200
Black 94 Z-28, 143,000 mi., 3:42 rearend, grey leather interior, tinted windows, PW, PDL, P ant., 6pt. cage with padding where they go through back panels, FG hood, PIAA driving lights, head and tail light black outs, new radio and panel for dash., FG hood, long block is still on eng. stand. I will try to list all the performance parts: as follows.
Long block built by Shacklett racing engs; 6" rods, .010 over SRP pistons
Heads have SS large valves with bowl work, latest Beehive springs & kit
2 sets Comp. pushrods 7.195 and 7.180, new Comp. 280XFI HR 13 cam
Fluid damper balancer, new TC & gears, Gaskets needed for assembly
Tall polished alum. VCs, Taylor OVC wires with retainers
Fidanza alum. FW, new Centerforce Dual Friction clutch complete
M-6 with B&M shifter, 4" alum. DS with HD joints
New Hooker Super Comp coated headers with gaskets and bolts
2 sets Hyd rollers, new spider retainer for lifters, new oil pump
Holley 58mm TB with gasket, Lucas 42# injectors
Flowmaster catback with chrome angle tips, 5pt Simpson harness
Aeromotive FP regulator, Hi volume LPE FP for in tank
Radiator & fans, AC cond., wire harness still in place in eng. bay
I know I probably forgot to list some parts, pan is off so you can inspect eng.
its never been run, most parts I listed are in boxes. NO Tires and Wheels
This is my pet project but 2 strokes , 6 by-passes and medical bills force me to sell. $7200
Long block built by Shacklett racing engs; 6" rods, .010 over SRP pistons
Heads have SS large valves with bowl work, latest Beehive springs & kit
2 sets Comp. pushrods 7.195 and 7.180, new Comp. 280XFI HR 13 cam
Fluid damper balancer, new TC & gears, Gaskets needed for assembly
Tall polished alum. VCs, Taylor OVC wires with retainers
Fidanza alum. FW, new Centerforce Dual Friction clutch complete
M-6 with B&M shifter, 4" alum. DS with HD joints
New Hooker Super Comp coated headers with gaskets and bolts
2 sets Hyd rollers, new spider retainer for lifters, new oil pump
Holley 58mm TB with gasket, Lucas 42# injectors
Flowmaster catback with chrome angle tips, 5pt Simpson harness
Aeromotive FP regulator, Hi volume LPE FP for in tank
Radiator & fans, AC cond., wire harness still in place in eng. bay
I know I probably forgot to list some parts, pan is off so you can inspect eng.
its never been run, most parts I listed are in boxes. NO Tires and Wheels
This is my pet project but 2 strokes , 6 by-passes and medical bills force me to sell. $7200
Thread
Thread Starter
Forum
Replies
Last Post



