'94 Hugger Orange Z28 For Sale
07-03-2007, 04:37 PM
#1
Registered User
Thread Starter
Join Date: Feb 2005
Location: VA
Posts: 255
'94 Hugger Orange Z28 For Sale
I'm testing the waters to see if there's any interest in my car. I've got the itch for a street bike and want to sell it first.
-Car was painted about a year ago hugger orange.
-Has 6 point roll cage also painted hugger orange
-85K miles
Mods include:
-SS hood
-99-up SS spoiler
-Berger Panel
-BBK 52MM TB
-K&N FIPK
-Scorpion 1.7 roller rockers
-Mac midlength headers and y
-Mufflex 4" catback
-4.10 rear with T/A cover/girdle
-TH350 recently built with 3000 stall and hurst quarter stick
-Weld prostars on all four corners. 15X3.5 up front with 165/15 and 15X8 in rear with 275/50 15 Mickey Thompson ET street radials with 6 track passes on them.
-I also have a CSR electric water pump and Hooker Supercomp Longtubes and Off Road Y to go with the car that haven't been installed.
-Car has been a best of 8.1@84
Issue:
I noticed a noise in the bottom end after it warms up. I've been told it was a wrist pin, a rod bearing, and even an exhuast leak. It holds good oil pressure, does not overheat, burn or use any oil. Worst case scenario, it could need new bearings.
Price: $4300 obo
My number is (434) 470-4116. Leave a message if you don't reach me. I work weird hours.
__________________
-Car was painted about a year ago hugger orange.
-Has 6 point roll cage also painted hugger orange
-85K miles
Mods include:
-SS hood
-99-up SS spoiler
-Berger Panel
-BBK 52MM TB
-K&N FIPK
-Scorpion 1.7 roller rockers
-Mac midlength headers and y
-Mufflex 4" catback
-4.10 rear with T/A cover/girdle
-TH350 recently built with 3000 stall and hurst quarter stick
-Weld prostars on all four corners. 15X3.5 up front with 165/15 and 15X8 in rear with 275/50 15 Mickey Thompson ET street radials with 6 track passes on them.
-I also have a CSR electric water pump and Hooker Supercomp Longtubes and Off Road Y to go with the car that haven't been installed.
-Car has been a best of 8.1@84
Issue:
I noticed a noise in the bottom end after it warms up. I've been told it was a wrist pin, a rod bearing, and even an exhuast leak. It holds good oil pressure, does not overheat, burn or use any oil. Worst case scenario, it could need new bearings.
Price: $4300 obo
My number is (434) 470-4116. Leave a message if you don't reach me. I work weird hours.
__________________
And will be.
Thread
Thread Starter
Forum
Replies
Last Post
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
12-03-2014 12:30 PM