94 forged/supercharged Z28
Thread Starter
Registered User
Joined: Dec 2005
Posts: 106
From: Western NY
94 forged/supercharged Z28
My name is Adam and I'm selling my supercharged & forged z28 camaro and has about 83K on it and is a 6spd. The car is $6800 firm and has a clean title. The car is making about 550HP at the crank. Car is located in Farmington NY 14425.
The reason I'm selling is to save money for a house and I ride my motorcycle a lot instead of the camaro.
The engine was professionally built and I have records for the major purchases and work done on the car. There is quite a list of mods, many done by the previous owner but I have done some myself too. The car is quite streetable but is set up as a street/strip car. Car has had over $20K invested into already and has potential to be a low 12sec car with the drag radials. This car is a steal at this price!!
-Forged 350ci 8.8:1 shortblock: Eagle 4340 forged crank, Eagle forged H-beam rods, TRW 21cc forged blower pistons, Melling oil pump, Clevite bearings, internally balanced, professionally built
-Vortech V2 S-trim, 6.66" crank pulley, 3.33" blower pulley, 11psi at redline (6100rpms)
There are too many mods to list!! It has modified valvetrain, ignition, borla exhaust with electronic cutout, 17'' GM ZR1 rims (rims are well over $500 alone)
Lots of supsension mods (handles VERY WELL!). Mcleod single disk clutch, 3.73 gears, etc.
I have many things extra to include with purchase: 2 C5 Z06 rims with 275 Nitto 555R Drag Radials, Wolf Noah car cover, unopened Autometer tachometer, 4 stock z28 rims, 2 never used gaskets for blower head unit. Extras will be included all together for $250 on top of selling price.
The camaro does have some problems: Cosmetically it has some scratches and rock chips but mainly a tear on the side of the drivers seat. There is a small crack in the dash too. The biggest problem is that the car needs a new crank seal gasket, the car leaks a small
amount of oil under boost pressure. However, the car runs and drives well.
http://www.cardomain.com/member_page...675_2_full.jpg
http://www.cardomain.com/member_page...675_4_full.jpg
Call my cell 585-766-8947 or e-maol me alotycze@rochester.rr.com with questions or to see the car. I can e-mail pictures upon request.
The reason I'm selling is to save money for a house and I ride my motorcycle a lot instead of the camaro.
The engine was professionally built and I have records for the major purchases and work done on the car. There is quite a list of mods, many done by the previous owner but I have done some myself too. The car is quite streetable but is set up as a street/strip car. Car has had over $20K invested into already and has potential to be a low 12sec car with the drag radials. This car is a steal at this price!!
-Forged 350ci 8.8:1 shortblock: Eagle 4340 forged crank, Eagle forged H-beam rods, TRW 21cc forged blower pistons, Melling oil pump, Clevite bearings, internally balanced, professionally built
-Vortech V2 S-trim, 6.66" crank pulley, 3.33" blower pulley, 11psi at redline (6100rpms)
There are too many mods to list!! It has modified valvetrain, ignition, borla exhaust with electronic cutout, 17'' GM ZR1 rims (rims are well over $500 alone)
Lots of supsension mods (handles VERY WELL!). Mcleod single disk clutch, 3.73 gears, etc.
I have many things extra to include with purchase: 2 C5 Z06 rims with 275 Nitto 555R Drag Radials, Wolf Noah car cover, unopened Autometer tachometer, 4 stock z28 rims, 2 never used gaskets for blower head unit. Extras will be included all together for $250 on top of selling price.
The camaro does have some problems: Cosmetically it has some scratches and rock chips but mainly a tear on the side of the drivers seat. There is a small crack in the dash too. The biggest problem is that the car needs a new crank seal gasket, the car leaks a small
amount of oil under boost pressure. However, the car runs and drives well.
http://www.cardomain.com/member_page...675_2_full.jpg
http://www.cardomain.com/member_page...675_4_full.jpg
Call my cell 585-766-8947 or e-maol me alotycze@rochester.rr.com with questions or to see the car. I can e-mail pictures upon request.
Last edited by BMWKillR; Aug 24, 2008 at 08:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Jan 11, 2015 06:10 PM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM