3rd gen Race Car Starter Kit
3rd gen Race Car Starter Kit
My loss – your gain…..
I’ve got a 92 Z-28 that I have lost interest in, and want out of my life (and garage). It would be a great track car / autocross car, with a little work. Here are the highlights:
92 Z-28 Hardtop Car – 135k on the odo. The paint (teal) is shot, but there is no rust on the car. Glastek Fiberglass Cowl hood (bolt on). Expected dents and dings, but no major bodywork needed.
Engine .020 over 350 – 10.6 – 1 CR, Splayed main caps, steel crank and rods, KB pistons, Aluminum L98 heads, CC-305 cam and SS roller rockers. Holley Stealth Ram intake w/ 52 mm TB, SLP Headers and Cat-back (no cats) Exhaust. (less than 1,500 miles – maybe less than 1,000 – can’t remember the odo when it went in)
T-56 Conversion – Centerforce DF clutch, Pro 5.0 shifter, Spohn Crossmember and TA. (not sure of the total miles, but the gearbox was gone through before installation by Dan Popp of McClusky Chevrolet in Cincinnati)
Rebuilt rearend – 3.73 Motive Gears, Eaton Posi, Moser Axles, Summit Aluminum Cover, Ratech install parts w/ solid pinion spacer (less than 200 miles)
Chassis – Spohn subframe connectors (weld in), Eibach springs, KYB shocks, all new steering parts from spindle to spindle (except Pitman arm), Suspension Techniques Sway Bars 35/25
The engine needs tuned for the cam / intake – I have a number of items from Craig Moates that will be available separately to whoever buys the car. Some of the additional items available are:
Laptop w/ scanning, emulator, and prom burning tools
New C4-HD front brake setup from Ed Miller
Corbeau Seats and brackets (almost new – still in box)
Adjustable LCA’s and Panhard rod – needs new rod ends.
1LE – a/c delete boxes (2) and air pump replacement pulley
6 Single stripe IROC wheels - 16 x 8 (4 rears)
I figure I’ve got about $15k into the car plus however may hours (too many). I’m going to ask $7k OBO for the car (only) and see where that gets me. I’m not going to part out the car of sell any of the extra parts until the car is sold. If anyone has any interest, please PM me or e-mail me at mhalter@columbus.rr.com .
Thanks,
Mike
I’ve got a 92 Z-28 that I have lost interest in, and want out of my life (and garage). It would be a great track car / autocross car, with a little work. Here are the highlights:
92 Z-28 Hardtop Car – 135k on the odo. The paint (teal) is shot, but there is no rust on the car. Glastek Fiberglass Cowl hood (bolt on). Expected dents and dings, but no major bodywork needed.
Engine .020 over 350 – 10.6 – 1 CR, Splayed main caps, steel crank and rods, KB pistons, Aluminum L98 heads, CC-305 cam and SS roller rockers. Holley Stealth Ram intake w/ 52 mm TB, SLP Headers and Cat-back (no cats) Exhaust. (less than 1,500 miles – maybe less than 1,000 – can’t remember the odo when it went in)
T-56 Conversion – Centerforce DF clutch, Pro 5.0 shifter, Spohn Crossmember and TA. (not sure of the total miles, but the gearbox was gone through before installation by Dan Popp of McClusky Chevrolet in Cincinnati)
Rebuilt rearend – 3.73 Motive Gears, Eaton Posi, Moser Axles, Summit Aluminum Cover, Ratech install parts w/ solid pinion spacer (less than 200 miles)
Chassis – Spohn subframe connectors (weld in), Eibach springs, KYB shocks, all new steering parts from spindle to spindle (except Pitman arm), Suspension Techniques Sway Bars 35/25
The engine needs tuned for the cam / intake – I have a number of items from Craig Moates that will be available separately to whoever buys the car. Some of the additional items available are:
Laptop w/ scanning, emulator, and prom burning tools
New C4-HD front brake setup from Ed Miller
Corbeau Seats and brackets (almost new – still in box)
Adjustable LCA’s and Panhard rod – needs new rod ends.
1LE – a/c delete boxes (2) and air pump replacement pulley
6 Single stripe IROC wheels - 16 x 8 (4 rears)
I figure I’ve got about $15k into the car plus however may hours (too many). I’m going to ask $7k OBO for the car (only) and see where that gets me. I’m not going to part out the car of sell any of the extra parts until the car is sold. If anyone has any interest, please PM me or e-mail me at mhalter@columbus.rr.com .
Thanks,
Mike
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM



