1999 Z28 Roller
#1
1999 Z28 Roller
1999 Z28
Black/Graphite
Leather Interior, T-Tops
Original 6speed car
Still has complete wiring harness.
Good starting point for race car.
BMR Black Tubular K-member w/ LS1 mounts
BMR Black Upper and Lower A-Arms
Front QA1 Stocker R's and springs
Rear QA1 shocks and stock springs
Moser 9" Rear ( 4.30's w/ spool, ARP 1/2" studs )
Wilwood HD Drag Brakes
Wolfe Racecraft Rear Drag Bar
Adjustable rod-end LCA's
Adjustable rod-end PHR
Custom Boxed SFC's
Weld Pro Star 15x3.5" Fronts
Weld Pro Star 15x10" Rears
Hoosier QTP 28x11.5" Tires (10 runs on them)
Stewart Warner Shiftlight w/ digital tach inside
If you add up everything you would be looking at investing in for a roller yourself, even in terms of buying the parts used, there's $3500 in stuff on it. Basically looking at getting an LS1 roller for $3500 then.
$7000
Located in Milwaukee, WI. Car currently has motor/trans in the car so it is still able to be driven to "check out"
http://community.webshots.com/user/z28kid99
Black/Graphite
Leather Interior, T-Tops
Original 6speed car
Still has complete wiring harness.
Good starting point for race car.
BMR Black Tubular K-member w/ LS1 mounts
BMR Black Upper and Lower A-Arms
Front QA1 Stocker R's and springs
Rear QA1 shocks and stock springs
Moser 9" Rear ( 4.30's w/ spool, ARP 1/2" studs )
Wilwood HD Drag Brakes
Wolfe Racecraft Rear Drag Bar
Adjustable rod-end LCA's
Adjustable rod-end PHR
Custom Boxed SFC's
Weld Pro Star 15x3.5" Fronts
Weld Pro Star 15x10" Rears
Hoosier QTP 28x11.5" Tires (10 runs on them)
Stewart Warner Shiftlight w/ digital tach inside
If you add up everything you would be looking at investing in for a roller yourself, even in terms of buying the parts used, there's $3500 in stuff on it. Basically looking at getting an LS1 roller for $3500 then.
$7000
Located in Milwaukee, WI. Car currently has motor/trans in the car so it is still able to be driven to "check out"
http://community.webshots.com/user/z28kid99
Thread
Thread Starter
Forum
Replies
Last Post