1996 Z28SS For Sale
Thread Starter
Registered User
Joined: Dec 2002
Posts: 109
From: W. Chester, PA
1996 Z28SS For Sale
I am looking to sell my 96 SS. It is a black, hard-top, manual, cloth interior with power windows and locks. Tires have about 75% tread left and new rear brake pads were put on about 2K ago. The SLP extra options are Level 2 Suspension(Eibach springs and Bilstein Shocks), 2OTL exhaust, Hurst shifter, Floormats. The car has about 63K miles on it and the mods are as follows:
Hotcam Kit with new PR's and timing chain(Installed by Brian(ProjectZ28), he is the mod for the North Eastern Section, about 10k miles ago and has been running great)
LT4 Valve Covers(will include stock ones)
SLP Dual-cat headers Jet-Hot coated
Off-Road Y-pipe
Strange 4.10 gears w/ TA cover and stud kit(Thunder Racing Kit) I will include 3.42 gears with the car
BMR STB and adj. PHR
OBD1 conversion by Madwolf tuning, also sent back to him after dyno run to make changes and correct for gears
Taylor wires and A/C Delco Iridium plugs, installed during cam install
AIR, EGR and A/C delete pulley(have 2 new catco cats that will throw in for $100)
LS1 Aluminum Drive-shaft
Lou's Short Stick
Ram Clutch Installed after cam
Fairly new window motors.
Other small mods I am probably forgetting.
The problems with the car are the key fob locks doors and opens trunk, but does not unlock doors, some paint flaws, nothing major only noticiable close up, rear hatch window seal is not perfect.
I am looking to get $7500/OBO for the car. It currently has a new Emissions exempt tag because I drive it less the 5K a year. If you live in PA and drive less than 5K a year you do not have to worry about emissions. I can be contacted via email at ehastings@conferencegroup.com and my cell is 302-893-9923. I have pics I can email. I live in West Chester, PA. Thanks.
Hotcam Kit with new PR's and timing chain(Installed by Brian(ProjectZ28), he is the mod for the North Eastern Section, about 10k miles ago and has been running great)
LT4 Valve Covers(will include stock ones)
SLP Dual-cat headers Jet-Hot coated
Off-Road Y-pipe
Strange 4.10 gears w/ TA cover and stud kit(Thunder Racing Kit) I will include 3.42 gears with the car
BMR STB and adj. PHR
OBD1 conversion by Madwolf tuning, also sent back to him after dyno run to make changes and correct for gears
Taylor wires and A/C Delco Iridium plugs, installed during cam install
AIR, EGR and A/C delete pulley(have 2 new catco cats that will throw in for $100)
LS1 Aluminum Drive-shaft
Lou's Short Stick
Ram Clutch Installed after cam
Fairly new window motors.
Other small mods I am probably forgetting.
The problems with the car are the key fob locks doors and opens trunk, but does not unlock doors, some paint flaws, nothing major only noticiable close up, rear hatch window seal is not perfect.
I am looking to get $7500/OBO for the car. It currently has a new Emissions exempt tag because I drive it less the 5K a year. If you live in PA and drive less than 5K a year you do not have to worry about emissions. I can be contacted via email at ehastings@conferencegroup.com and my cell is 302-893-9923. I have pics I can email. I live in West Chester, PA. Thanks.
Last edited by E96Z28SS; Dec 15, 2006 at 08:52 AM.
Registered User
Joined: Oct 2002
Posts: 84
From: Buffalo NY
Registered User
Joined: Dec 2001
Posts: 8
From: Florence, MS
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
Feb 9, 2016 09:21 PM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM