1996 Z28 heads/cam/full boltons/N20 for SALE
1996 Z28 heads/cam/full boltons/N20 for SALE
http://cgi.ebay.com/ebaymotors/Chevr...US_Cars_Trucks
There is a full description of this near car on EBAY along with 24 photos. The link is posted above. PRICE IS NEGOTIABLE (I prefer to sell on this board)
1996 Chevrolet Camaro Z28 Convertible (HIGHLY MODIFIED 500hp with Nitrous)
White Exterior / Black Interior
5.7L V8 LT1 Engine
4 Speed Automatic Transmission with Overdrive
92000 miles
MODIFICATIONS
· This car put down 367 rear wheel HP with motor only, with only a
small shot of Nitrous it will put down around 500 HP at the wheels
· Professionally Ported and Polished Heads by Lloyd Elliott, new valvetrain with 1.6 roller rockers
· Comp Cam XE 224/230 on 112 LSA (lift is .536/.544) Camshaft
· Nitrous Works Wet Nitrous System with large variety of jets (I have never sprayed more than a 110 shot). Includes Nitrous Gauge, Bottle Heater and Purge System
· Ported Intake, 58mm BBK Throttle body, Ported / Polished MAF, K&N Cold Air Intake
· Jet Hot Longtube Race Headers with Dual 3” Cutouts, Aftermarket Catalytic Convertor and Muffler (full exhaust for street use and cutouts for the rack)
· 160 Degree Thermostat, Custom PCMFORLESS Computer Tuning, CSI Electric Water pump
· #42lb SVO Fuel Injectors with a 255 Walbro Fuel Pump
· New Race Built Transmission with a 3200 Vigilante Stall with Aftermarket Cooler (less than 2000 miles on transmission)
· 16" OEM chrome 5 star wheels from a 98 Z28 (new tires with less than 300 miles on them).
· Strange 3.73 Race Gear in the rearend
· Underdrive Pulley from ASP, Keyed Crank Hub from Thunderracing, MSD Spark Plug Wires, Poly Motor and Transmission Mounts, Kenny Brown Double Diamond Subframe Connectors, BMR Rear Lower Control Arms with Solid Bushings, Driveshaft Safety Loop
These Things Have Been Removed For Weight Reduction
· Heating and air conditioning system, back seats, power steering, air bags, windshield washer fluid reservoir (the windshield wipers still work)
· The car does have manual seats instead of power seats
This car consistently ran 6.9 at 96mph in the 1/8 mile at Elkcreek Dragway.
(110 shot of Nitrous engaged off the line and great track conditions)
I have a video of this car running 11.57 at 120mph in the ¼ mile at Bristol Dragway.
(110 shot of Nitrous was only engaged after the 1/8 mile mark due to poor track conditions)
CAR FEATURES
· Keyless Entry and Alarm System
· Factory Bose CD Player
· Power Windows, Power Locks, and Power Mirrors
· New convertible top 5 years ago
· Current VA Inspection Sticker
· The car is very clean and well maintained and comes from a smoke-free environment
The car runs great, no problems or issues. I have the DYNO printouts and FLOWSHEETS from the Headwork.
I will also include a mounted set of Mickey Thompson ET Street Slicks (26x11.5-R16) that have barely been used.
There is a small scratch on the right rear bumper (seen in the photos).
I am going back to school and really do not want to sell this car but I have no room in my life for it
Please send me a message if you have any questions
There is a full description of this near car on EBAY along with 24 photos. The link is posted above. PRICE IS NEGOTIABLE (I prefer to sell on this board)
1996 Chevrolet Camaro Z28 Convertible (HIGHLY MODIFIED 500hp with Nitrous)
White Exterior / Black Interior
5.7L V8 LT1 Engine
4 Speed Automatic Transmission with Overdrive
92000 miles
MODIFICATIONS
· This car put down 367 rear wheel HP with motor only, with only a
small shot of Nitrous it will put down around 500 HP at the wheels
· Professionally Ported and Polished Heads by Lloyd Elliott, new valvetrain with 1.6 roller rockers
· Comp Cam XE 224/230 on 112 LSA (lift is .536/.544) Camshaft
· Nitrous Works Wet Nitrous System with large variety of jets (I have never sprayed more than a 110 shot). Includes Nitrous Gauge, Bottle Heater and Purge System
· Ported Intake, 58mm BBK Throttle body, Ported / Polished MAF, K&N Cold Air Intake
· Jet Hot Longtube Race Headers with Dual 3” Cutouts, Aftermarket Catalytic Convertor and Muffler (full exhaust for street use and cutouts for the rack)
· 160 Degree Thermostat, Custom PCMFORLESS Computer Tuning, CSI Electric Water pump
· #42lb SVO Fuel Injectors with a 255 Walbro Fuel Pump
· New Race Built Transmission with a 3200 Vigilante Stall with Aftermarket Cooler (less than 2000 miles on transmission)
· 16" OEM chrome 5 star wheels from a 98 Z28 (new tires with less than 300 miles on them).
· Strange 3.73 Race Gear in the rearend
· Underdrive Pulley from ASP, Keyed Crank Hub from Thunderracing, MSD Spark Plug Wires, Poly Motor and Transmission Mounts, Kenny Brown Double Diamond Subframe Connectors, BMR Rear Lower Control Arms with Solid Bushings, Driveshaft Safety Loop
These Things Have Been Removed For Weight Reduction
· Heating and air conditioning system, back seats, power steering, air bags, windshield washer fluid reservoir (the windshield wipers still work)
· The car does have manual seats instead of power seats
This car consistently ran 6.9 at 96mph in the 1/8 mile at Elkcreek Dragway.
(110 shot of Nitrous engaged off the line and great track conditions)
I have a video of this car running 11.57 at 120mph in the ¼ mile at Bristol Dragway.
(110 shot of Nitrous was only engaged after the 1/8 mile mark due to poor track conditions)
CAR FEATURES
· Keyless Entry and Alarm System
· Factory Bose CD Player
· Power Windows, Power Locks, and Power Mirrors
· New convertible top 5 years ago
· Current VA Inspection Sticker
· The car is very clean and well maintained and comes from a smoke-free environment
The car runs great, no problems or issues. I have the DYNO printouts and FLOWSHEETS from the Headwork.
I will also include a mounted set of Mickey Thompson ET Street Slicks (26x11.5-R16) that have barely been used.
There is a small scratch on the right rear bumper (seen in the photos).
I am going back to school and really do not want to sell this car but I have no room in my life for it
Please send me a message if you have any questions
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM



