1995 z28 m6 white chassis roller *CLEAN*
Thread Starter
Registered User
Joined: Feb 2005
Posts: 65
1995 z28 m6 white chassis roller *CLEAN*
1995 z28, m6, roller, 95k miles, white, grey cloth interior.
email: lee.eldridge@gmail.com
Located in Houston, will not ship, can meet within 100 miles of Houston.
1=horrible, 5=fair, 10=perfect!
Body: 9..10 (no major dents/dings, very nice)
Paint: 8.5..10 (couple very small scatches, nose has a small spider that's barely visible, EXCELLENT paint, little wear)
Interior 9..10 (ZERO rips/tears in seats, very little wear)
Electronics 9..10 (factory cd, power seats/windows/locks all working, wiring harness in)
Brakes: 5..10 (will need to have rotors turned, new pads in the rear)
Wheels: 8..10 (stock salad shooters, no dings or scratches)
Tires: 7..10 (nothing special)
Master/slave cylinder: 9..10 (no leaks, works great, needs nothing)
Steering: 8..10 (powersteering pump is good, working order, needs nothing)
ABS: 9.10 (works perfect, throws no codes)
Suspension: 8..10 (95k miles, needs nothing)
Rear End: 9..10 (no leaks, stock 3.42's, never changed)
Driveshaft: 6..10 (needs to be cleaned up some, UV joints are fine)
All this car needs is a tranny/engine and it's ready to go.
Price: Make an Offer! This car needs to go!!!
email: lee.eldridge@gmail.com
Located in Houston, will not ship, can meet within 100 miles of Houston.
1=horrible, 5=fair, 10=perfect!
Body: 9..10 (no major dents/dings, very nice)
Paint: 8.5..10 (couple very small scatches, nose has a small spider that's barely visible, EXCELLENT paint, little wear)
Interior 9..10 (ZERO rips/tears in seats, very little wear)
Electronics 9..10 (factory cd, power seats/windows/locks all working, wiring harness in)
Brakes: 5..10 (will need to have rotors turned, new pads in the rear)
Wheels: 8..10 (stock salad shooters, no dings or scratches)
Tires: 7..10 (nothing special)
Master/slave cylinder: 9..10 (no leaks, works great, needs nothing)
Steering: 8..10 (powersteering pump is good, working order, needs nothing)
ABS: 9.10 (works perfect, throws no codes)
Suspension: 8..10 (95k miles, needs nothing)
Rear End: 9..10 (no leaks, stock 3.42's, never changed)
Driveshaft: 6..10 (needs to be cleaned up some, UV joints are fine)
All this car needs is a tranny/engine and it's ready to go.
Price: Make an Offer! This car needs to go!!!
Last edited by tx_lt1; Feb 15, 2005 at 11:48 PM.
Thread Starter
Registered User
Joined: Feb 2005
Posts: 65
Registered User
Joined: Feb 2005
Posts: 176
From: St. Louis MO.
Re: 1995 z28 m6 white chassis roller *CLEAN*
Price????? Can u send pics to redlinemotorsports95@yahoo.com?
Registered User
Joined: May 2004
Posts: 36
Banned FOR SCAMMING - Nick[William] Dascal - (516) 931-0586
Joined: Dec 2004
Posts: 59
Thread
Thread Starter
Forum
Replies
Last Post
Garcia5
General 1967-2002 F-Body Tech
15
Jul 7, 2022 06:51 PM
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
dbusch22
LT1 Based Engine Tech
2
Jan 5, 2015 07:14 PM
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM