1994 Z28 in NY
Thread Starter
Registered User
Joined: Apr 2005
Posts: 50
From: Brockport NY
1994 Z28 in NY
Considering selling my 1994 Camaro Z28. This Car is polo green metallic T-Top car. It has Power mirrors, seats, locks, windows, cold A/C, tan cloth interior, Z28 embroiderd floor mats, alpine cd player, and whiteface guages. The car has just over 75,000 miles with a beautifull interior. The exterior is about a 7/10 since the front clip could use paint since it has many rock chips. The rest of the outside body is awesome for an 11 year old car. The windows are tinted 20% all around by the tint shop 2 years ago. Last year the opti-spark and plugs and wires were replaced by doan. This year the tranny fluid was changed with a parts install by new era performance parts. The oil has been changed ever 3000 miles with mobil one and ac delco filters and the car has never seen winter. The stock salad shooters are in great shape and have toyo proxes 4 all around with only about 1000 miles on them (look brand new). This car also has a long list of mods.
mods:
K&N FIPK, 1LE intake elbow, 52mm edelbrock throttle body, pacesetter ceramic coated shorty headers, 3" high flow magnaflow catalitic converter, 3" stainless steel magnaflow catback exaust, BMR Lower control arms and relocation brackets, TCI streetfighter 3000 stall speed converter, transgo shift kit, B&M transmition cooler.
The tranny stuff and suspention stuff is all new this year and the tranny stuff was installed and purchased from new era performance and cost over 1200 dollars and has about 500 miles on it. The exaust was done last august and only has about 2000 miles on it (sounds awesome).
mods not installed:
Hypertech power programmer 3 and 160* thermostat, granatelli maf sensor, BMR weld in sub frame connectors.
I also have most original parts plus another set of salad shooters in ok shape with bad tires.
Im asking for $6000 firm with the mods it has and $6700 with a set of 17" SS wheels that i bought with only 1000 miles on them and put nitto 555's in the front and drag radials in the back which have only been on for 200 miles. Before the transmition stuff, Drag radials, and suspension stuff the car went 13.24 @ 105 so it should go easy 12's now.
My only reason for selling is because i want and artic white LS1 SS.
call 585-313-7569
__________________
mods:
K&N FIPK, 1LE intake elbow, 52mm edelbrock throttle body, pacesetter ceramic coated shorty headers, 3" high flow magnaflow catalitic converter, 3" stainless steel magnaflow catback exaust, BMR Lower control arms and relocation brackets, TCI streetfighter 3000 stall speed converter, transgo shift kit, B&M transmition cooler.
The tranny stuff and suspention stuff is all new this year and the tranny stuff was installed and purchased from new era performance and cost over 1200 dollars and has about 500 miles on it. The exaust was done last august and only has about 2000 miles on it (sounds awesome).
mods not installed:
Hypertech power programmer 3 and 160* thermostat, granatelli maf sensor, BMR weld in sub frame connectors.
I also have most original parts plus another set of salad shooters in ok shape with bad tires.
Im asking for $6000 firm with the mods it has and $6700 with a set of 17" SS wheels that i bought with only 1000 miles on them and put nitto 555's in the front and drag radials in the back which have only been on for 200 miles. Before the transmition stuff, Drag radials, and suspension stuff the car went 13.24 @ 105 so it should go easy 12's now.
My only reason for selling is because i want and artic white LS1 SS.
call 585-313-7569
__________________
Thread
Thread Starter
Forum
Replies
Last Post
94z28jbw
Site Help and Suggestions
2
Sep 8, 2002 03:22 PM