1994 Z/28 383 solid roller F/S
Thread Starter
Registered User
Joined: Sep 1998
Posts: 137
From: Horsham, PA
1994 Z/28 383 solid roller F/S
EDIT:
Car has a small crack in one of the exhaust ports on one of the heads. I need to sell AS IS. Everything is fully assembled, but the heads need to be replaced. I do not have the time or money to mess with it now.
Asking $5,500 I will be traveling a lot up until Christmas, so feel free to call with any questions (484) 919-1717.
Car must go.
Thanks,
Pete
I've decided to sell my car. Below is the info . . .feel free to email or PM with any questions.
1994 Z/28, black with charcoal grey interior and tinted windows.
Original A4 car, converted to a Coan TH400 with Coan 3000-3500 Stall convertor.
383, cam motion solid roller cam, GTP stage IV heads, LT1 port matched intake, 58mm TB, Jet Hot long tube headers with emission hook-up, dual 3" exhaust with X-pipe, dynomax bullet mufflers, dumps, stock wheels - Nitto DR's in the rear (245/50/16), BFG comp T/A's up front, Sphon extreme duty DS, stock rear with 3:73's, Random Tech adj T/A, SLP boxed panhard bar, Lakewook LCA's, BMR LCA lowering brackets, RR air bag, Hurst Quarter stick shifter, MSD6AL, OVC 9mm wires (black) with 1200* heat shielding, vented Opti conversion, new starter, Moroso cold air kit, 36# SVO injectors, Lakewood DS safety loop (not installed yet).
The engine and tranny has @1200 miles on it and the odometer reads 70,880. The body is straight and the paint is in good condition. The front bumper has a little of the clear coat peeling, but otherwise is in very good condition.
Serious inquiries only please (no trades). I have pic's and can get a sound clip if interested. Priced to sell. Asking $9,000.
Thanks, Pete
Car has a small crack in one of the exhaust ports on one of the heads. I need to sell AS IS. Everything is fully assembled, but the heads need to be replaced. I do not have the time or money to mess with it now.
Asking $5,500 I will be traveling a lot up until Christmas, so feel free to call with any questions (484) 919-1717.
Car must go.
Thanks,
Pete
I've decided to sell my car. Below is the info . . .feel free to email or PM with any questions.
1994 Z/28, black with charcoal grey interior and tinted windows.
Original A4 car, converted to a Coan TH400 with Coan 3000-3500 Stall convertor.
383, cam motion solid roller cam, GTP stage IV heads, LT1 port matched intake, 58mm TB, Jet Hot long tube headers with emission hook-up, dual 3" exhaust with X-pipe, dynomax bullet mufflers, dumps, stock wheels - Nitto DR's in the rear (245/50/16), BFG comp T/A's up front, Sphon extreme duty DS, stock rear with 3:73's, Random Tech adj T/A, SLP boxed panhard bar, Lakewook LCA's, BMR LCA lowering brackets, RR air bag, Hurst Quarter stick shifter, MSD6AL, OVC 9mm wires (black) with 1200* heat shielding, vented Opti conversion, new starter, Moroso cold air kit, 36# SVO injectors, Lakewood DS safety loop (not installed yet).
The engine and tranny has @1200 miles on it and the odometer reads 70,880. The body is straight and the paint is in good condition. The front bumper has a little of the clear coat peeling, but otherwise is in very good condition.
Serious inquiries only please (no trades). I have pic's and can get a sound clip if interested. Priced to sell. Asking $9,000.
Thanks, Pete
Last edited by WildThing94Z; Nov 19, 2005 at 01:45 PM.
Registered User
Joined: Feb 2004
Posts: 1,736
From: Reidsville, NC
Registered User
Joined: Nov 2003
Posts: 126
Re: 1994 Z/28 383 solid roller F/S
Originally Posted by WildThing94Z
TTT
Anyone?
Anyone?
Thread
Thread Starter
Forum
Replies
Last Post
95chwagon
Parts For Sale
4
Jan 13, 2015 09:19 PM