I have a 1993 Camaro z28 for sale. The car is black with grey interior. The car is a roller right now. The rear was re-built, but with all stock type parts. The car will come with a 4 bolt lt1 block that need one main stud taped out of it sense it broke off in it when it was tightend. Comes with crank-rods-pistons with new rings. Has new bearings also. Comes with lightly ported heads, brand new lt4 hotcam kit. I have the intake/fuel rail for it also plus a set of 24# injectors. The pcm and wiring harness are still in the car too. The car was a 6-speed car from the get go, but I have a 700r4 that will go with it. I don't know what condition the trans is in though. I also have most of the accesories that go with the car. Have a new headlight bar and the headlights. The car will need gaskets and a bunch of hardware. There is a problem with the passanger side widow sense someone broke into the car. It also needs hood hinges and brackets. There's a whole stack of parts that go with the car, i'm not sure what all I dont' have listed is there, but there is other stuff. This would be a good project for somone to play with. I have no time to deal with it right now.

 

here are 2 pics of the car. I will try and get more soon http://pg.photos.yahoo.com/ph/crawli...lbum?.dir=62f7

 

$2000 come and pic it up!

 

does it come with a 6-speed tranny?

 

interested in any trades?

 

It will come with a 700r4, and I dont' know the condition of the trans. The only thing i would be looking for in trade would be a 4" narrowed 9", a air/water intercooler, or a th400 with converter and brake with all good stuff inside. and that's about it.

 

Ttt

 

i have seen this car and it is in good shape. this would make a great project for someone that has the time to just put it together.

 

wish u where closer

 

emailed you...fairly close

 

e-mail replied

 

I dont need anything but the roller.... if you will seperate i'll buy the roller.