1986 IROC-Z Roller
NICE 1986 IROC-Z Roller
Hey guys.
Tim from Wyoming here.
I have to give up my swap project
I have done a lot of work on this car, over the past few years.
86 IROC Z rolling chassis-asking $3500 plus delivery charges.
If you are interested in a darn nice IROC-Z, I have a rolling chassis that includes all sorts of goodies and is also ready for an LT1 to drop right into it.
Some of the goodies include:
-redone and painted engine bay
-aftermarket fog lights custom installed (see pic below)
-Painted 4th gen rear end (see pic below) so you can put on Vette wheels or 4th gen Camaro wheels without needing spacers
-set of all four brand new, never opened headlights
-4th gen washer fluid reservoir located in the nose of the car just like on a 4th gen
-4th gen battery holder/coolant reservoir mounted on passenger side battery tray area
-4th gen polished radiator shroud with LT1 radiator and dual fans installed
-3.5" true cold air intake setup custom made by me (air filter attaches underneath driver's side battery tray area).
-4th gen master cylinder and Wilwood prop valve for disc braked rear end
-LS1 front brake upgrade
-Brand new QA1 18 way "click" adjustable front struts
-all newly powdercoated front end parts-k member, A-arms, hubs, motor mounts, etc.
-brand new Spohn steering linkage kit
-Brand New Energy suspension bushings up front-sway bar bushings, A-arm bushings, motor mount bushings
-4th gen Camaro seats front and back that are in perfect condition
-LT1 throttle cable bracket mounted to firewall to hold this cable snugly
-polished aluminum remote power steering reservoir and polished aluminum remote valve cover breather canister. Both have custom made mounts that I made.
-original 16" IROC wheels that are in very nice shape
-new tires with less than 2,000 miles on them
-it could use a paintjob and a little bodywork, but it's in very nice condition for an 86
-professionally redone hood
I am still working on putting the front end back together, as the k member and other parts just recently got finished being powdercoated, which cost me just shy of $600.00.
I take paypal: timmytina350@msn.com







Tim from Wyoming here.
I have to give up my swap project
I have done a lot of work on this car, over the past few years.86 IROC Z rolling chassis-asking $3500 plus delivery charges.
If you are interested in a darn nice IROC-Z, I have a rolling chassis that includes all sorts of goodies and is also ready for an LT1 to drop right into it.
Some of the goodies include:
-redone and painted engine bay
-aftermarket fog lights custom installed (see pic below)
-Painted 4th gen rear end (see pic below) so you can put on Vette wheels or 4th gen Camaro wheels without needing spacers
-set of all four brand new, never opened headlights
-4th gen washer fluid reservoir located in the nose of the car just like on a 4th gen
-4th gen battery holder/coolant reservoir mounted on passenger side battery tray area
-4th gen polished radiator shroud with LT1 radiator and dual fans installed
-3.5" true cold air intake setup custom made by me (air filter attaches underneath driver's side battery tray area).
-4th gen master cylinder and Wilwood prop valve for disc braked rear end
-LS1 front brake upgrade
-Brand new QA1 18 way "click" adjustable front struts
-all newly powdercoated front end parts-k member, A-arms, hubs, motor mounts, etc.
-brand new Spohn steering linkage kit
-Brand New Energy suspension bushings up front-sway bar bushings, A-arm bushings, motor mount bushings
-4th gen Camaro seats front and back that are in perfect condition
-LT1 throttle cable bracket mounted to firewall to hold this cable snugly
-polished aluminum remote power steering reservoir and polished aluminum remote valve cover breather canister. Both have custom made mounts that I made.
-original 16" IROC wheels that are in very nice shape
-new tires with less than 2,000 miles on them
-it could use a paintjob and a little bodywork, but it's in very nice condition for an 86
-professionally redone hood
I am still working on putting the front end back together, as the k member and other parts just recently got finished being powdercoated, which cost me just shy of $600.00.
I take paypal: timmytina350@msn.com







Last edited by new2chevy; Mar 19, 2012 at 01:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post



