tweeters on teh inside of the mirrors?
04-25-2003, 02:35 AM
#1
Registered User
Thread Starter
Join Date: Sep 2002
Posts: 45
tweeters on teh inside of the mirrors?
i wanted ot get tweeters that go on the inside of each side mirror. i have seen ones that like like they are factory. does anyone know where you can get one that look like they belong stock? thanks in advance
garrett
garrett
04-25-2003, 12:57 PM
#3
Registered User
Join Date: Nov 1998
Location: Macon, GA
Posts: 633
I have a set of MB Quart tweeters flush mounted in rear view mirror trim pieces. They're a perfect fit.
You can can see a pic here:
http://www.banddirector.cz28.com/photo2.html
You can can see a pic here:
http://www.banddirector.cz28.com/photo2.html
04-27-2003, 03:45 PM
#9
Registered User
Join Date: May 2002
Location: North Haven, CT
Posts: 915
Originally posted by BandDirector Blk98ZM6
I have a set of MB Quart tweeters flush mounted in rear view mirror trim pieces. They're a perfect fit.
You can can see a pic here:
http://www.banddirector.cz28.com/photo2.html
I have a set of MB Quart tweeters flush mounted in rear view mirror trim pieces. They're a perfect fit.
You can can see a pic here:
http://www.banddirector.cz28.com/photo2.html
How did you make those?
04-27-2003, 03:45 PM
#10
Registered User
Join Date: Nov 1998
Location: Macon, GA
Posts: 633
Originally posted by Marky82
Are those the same tweater pods that firebirdude mentioned?
Are those the same tweater pods that firebirdude mentioned?
Instead of cutting up my stock pieces, I got a spare set from a junkyard for $8 to cut up.
04-28-2003, 12:36 AM
#11
Registered User
Join Date: Feb 2001
Location: Macon,GA, USA
Posts: 1,288
Originally posted by BandDirector Blk98ZM6
No, those are just the stock rearview mirror trim pieces with a hole cut in them to mount the tweeter flush. There was plenty of room behind the trim piece for the tweeter.
Instead of cutting up my stock pieces, I got a spare set from a junkyard for $8 to cut up.
No, those are just the stock rearview mirror trim pieces with a hole cut in them to mount the tweeter flush. There was plenty of room behind the trim piece for the tweeter.
Instead of cutting up my stock pieces, I got a spare set from a junkyard for $8 to cut up.
04-28-2003, 10:16 AM
#14
Registered User
Join Date: Nov 1998
Location: Macon, GA
Posts: 633
www.speedautomotive.com is where I got them...it's an online junk yard I guess.
I ordered them at the same time I ordered a new spare tire panel trim piece to cut up to move the changer over, but all 4th Gen. share the same rear view mirror trim pieces, so I'm sure one of our local yards would have some.
I ordered them at the same time I ordered a new spare tire panel trim piece to cut up to move the changer over, but all 4th Gen. share the same rear view mirror trim pieces, so I'm sure one of our local yards would have some.
04-28-2003, 05:57 PM
#15
Registered User
Join Date: Dec 2000
Location: Alta Loma, CA
Posts: 1,320
Originally posted by firebirdude
Sounds like you could use a set of Kevin's tweeter pods!
At $75 a pair, they are a STEAL!
Sounds like you could use a set of Kevin's tweeter pods!
At $75 a pair, they are a STEAL!
Thread
Thread Starter
Forum
Replies
Last Post
Nayr
LT1 Based Engine Tech
7
03-03-2023 08:34 PM
autoxr166
General 1967-2002 F-Body Tech
0
09-25-2015 04:21 PM
[Electronics/Car Audio] NavTool Beta Testers Wanted
navtool.com
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
09-24-2015 03:30 PM