Does anyone have any pics. of custom fiberglass box in a f-body camaro. im going to start building one this weekend i just need a few ideas on the best way to utilize space.

Thanks

 

t-tops or not. do you want to save the room behind the hump?

 

im not sure. it doesnt really matter because i have a reg. box in the spot were the t-tops go (i have a hard top) and my amp sits on the gas tank area so i dont use it for anything else

 

i don't have any pictures, but you could do anything you want. get creative. you could flush mount it with the rest of the trunk, you could sink them and tilt them towards eachother. that's the good thing about fiberglass. you can do whatever you want to.

 

I have done this, it was several years back. I have mine tilted towards the cab of the car, resting on the latch for the hatch. It intersects with the hump for the gas tank perfectly. I then made a little angled platform for my amps so i could run the wires under it and hide them. I should be getting the car back today and will snap a few pics before i rip it out ( car died ).

 

Yea post pics asap

 

Car didn't come back today, my guy was busy. He said Monday a.m. I'll get pics then!

 

Got the car back this morning. Check out the photos on picasa.

yes, the box looks like complete ***, but it was 100% sealed at approx 1.5 cubic feet and hit 143.5db with no capacitor, bad rca cables and a skipping radio!

https://picasaweb.google.com/1058538...CMnC0_mw2ZWycQ

 

yea thats basically what i have in my trunk now with two 12 Kickers. Im about to upgrade though