I just have a couple of car audio questions for you guys... First off i have a 95 camaro with the Bose stock system in it, i want to put 2 Alpine Type S subs in it, but i need a little adivce and help. First off would a Rockford Fosgate Punch 400s power these amps and make them sound good. Second if i were to put them sitting up in the back trunk area, would the truck rattle, and where else could i put them to prevent this, like facing the back, or facing the other way of what, or slant them or what? I want the least rattle on the outside and of course the best sound on the inside. Also becuase i have a stock HU will i have to do anything special when im plugging in my amp and stuff, like do i have preamp outputs or whats the deal with that. Thanks for all the helps guys!

 

Welcome to the board.

Start by going to LS1.com and reading the "DON'T READ THIS (FAQ)" at the top of the "Electronics" forum there. There's all kinds of useful information there. And be sure to read ALL of it. Too many times people say that they read it but couldn't find what they were looking for when in fact it clearly IS there.

Talk to Steve (megabass) at www.subthump.com for some killer choices in subwoofer enclosures for 4th gens.