adding an amp
I feel extremely stupid on this on because I should know. BUT.......for those of you who've added an amp to the Monsoon system, maybe you can helpl me. My stereo is all stock, and I've added an amp, x-over, and line converter to my system. My question is, with everything wired up I'm not getting much power to the sub. It seems as though I might have wired into something that's drawing power from my amp. I spliced into the right rear speaker and that goes to the line converter, then to the x-over, then to the amp. I've gone over the wires over and over again, but I just can't figure it out. I really wish the stock head unit had RCA outputs so I could eliminate the line converter, but I don't want to change out the head unit since it's a double din. I dunno, maybe someone can come up with something I'm overlooking. I feel like a complete retard, so someone please help me out if you can......
Two things I can think of to consider:
1. Have you tried turning up the gain on your LOC if it has one (it should).
2. The outputs you're trying to use may have a crossover upstream so you're not sending I full range signal to your amp/x-over.
1. Have you tried turning up the gain on your LOC if it has one (it should).
2. The outputs you're trying to use may have a crossover upstream so you're not sending I full range signal to your amp/x-over.
In terms of an "upstream" crossover, is that something that's installed on the speaker itself? I noticed that there are 4 wires going to the speaker. I'm guessing it's the high and midrange, seeing as how it's a 2-way speaker. Any idea which ones are for the midrange and which ones are for the high. I might have spliced into either the high or one of each. That would suck if that's the case. Is there a wiring schematic online somewhere that I can reference to? Of course the wiring for the Monsoon isn't in my service manual so I'm kinda at a loss here.
The BEST place to tap a signal from the Monsoon system is behind the head unit. All speakers in the Monsoon are x-over by the Monsoon amp (except the front tweetes, they're run off the HU), so that's why you're not getting enough bass.
Check out the FAQ's at the top of the Electronics Forum over at www.ls1.com for all the information you could possibly want to know on adding on to the Monsoon system. It's a long thread, but worth the read. It has the diagrams you're looking for as well.
Check out the FAQ's at the top of the Electronics Forum over at www.ls1.com for all the information you could possibly want to know on adding on to the Monsoon system. It's a long thread, but worth the read. It has the diagrams you're looking for as well.
Last edited by BandDirector Blk98ZM6; Feb 18, 2003 at 10:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
RX Speed Works
Supporting Vendor Group Purchases and Sales
0
Sep 11, 2015 03:31 PM
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Aug 27, 2015 06:37 PM



