I bought a used 98 SS spoiler and I was wondering if there was a link or if anyone could give me some information on how to remove my stock spoiler and to install the new 98 SS spoiler and also to install a relay or resistor so the ABS INOP light doesn't come on. Any information and help would be greatly apprecaited. Thanks in advance.

 

lift up the hatch and take off the plastic cover (pop out the rivets and pull it off). after that is off, unscrew the screws holding on the spoiler and pull it off. that is all. reverse this for the install of the new one.


ABS INOP is also a dilema that i am fighting so i cant help u there.

 

i just cut the connector off and connected the 2 wires..no problems with the light