EliteSparkPlugs.com wires & Made For You looms - PICS!
EliteSparkPlugs.com wires & Made For You looms - PICS!
http://img133.echo.cx/img133/7379/im0008096ed.jpg
http://img133.echo.cx/img133/6919/im0008119sd.jpg
(excuse the mess)
These are the wires available from EliteSparkPlugs.com with the optional 1200* heat shielding. I opted to go with a set of 7/8mm black looms from CenturyPerformance.com (where I found them to be the cheapest)
http://img133.echo.cx/img133/6919/im0008119sd.jpg
(excuse the mess)
These are the wires available from EliteSparkPlugs.com with the optional 1200* heat shielding. I opted to go with a set of 7/8mm black looms from CenturyPerformance.com (where I found them to be the cheapest)
Last edited by TruDualed95Z; Jun 21, 2005 at 03:21 PM.
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
I called EliteSparkPlugs.com and they had a special going on with their red 8mm wires with 1200* heat shielding for $50. They're typically $69. I also picked up the looms for $39. These prices were all before shipping, so the cost of everything shipped was ~$105. It comes out to be about the same price, if not a bit less, than the set offered by ThunderRacing.com and these are precut, so no need to measure and prep the boots.
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
Looks good! Now clean the rest :P
http://home.indy.rr.com/bsmith60/94f...ormula-014.jpg
Thunder Racing kit. I was going to go with Elite Spark Plugs, but I dont mind doing a little work to save a few pennies.
http://home.indy.rr.com/bsmith60/94f...ormula-014.jpg
Thunder Racing kit. I was going to go with Elite Spark Plugs, but I dont mind doing a little work to save a few pennies.
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
How long did it take to get yours because its been almost 10 days since I ordered my mine and I havent received them yet. I was kinda upset that I paid 11 for shipping that takes 10 days. I hope quality makes up for it. Im not trying to rant or anything IM just trying to get this car done before i go back to work next week
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
It took me about a week to get mine. I'm sorry to hear it's taking so long to get yours, but the quality will definitely make up for it!
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
Originally Posted by unTAmedLS1
How long did it take to get yours because its been almost 10 days since I ordered my mine and I havent received them yet. I was kinda upset that I paid 11 for shipping that takes 10 days. I hope quality makes up for it. Im not trying to rant or anything IM just trying to get this car done before i go back to work next week
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
Originally Posted by TruDualed95Z
nope. they're pre-cut and the boots are already on them.
I would definetly go with the pre-cut ones if i was to do it again. Hell, I'd pay an extra $50 to get pre cut wires. Installing the ones from Thunder Racing was the hardest part of my header install! Took about 2.5-3 hours just to cut the wires and put the boots on. The boots seemed like they werent big enough for the wires.
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
So I received them and it was worth the wait but for 11.00 they should have got here faster than 11 days..But they are the nicest wires I've seen
Re: EliteSparkPlugs.com wires & Made For You looms - PICS!
I'm gonna end up gettin those since they are precut! I'll be out of town for a good 8 days so I won't mind the wait and niether will my car since it won't be moving!


