Camaro front bumper
Registered User
Joined: Dec 2003
Posts: 1,526
From: Madison, Wi
Re: Camaro front bumper
easy.
remove air dam and both side splash panels. Then remove the 3 bolts from each side that hold the fender to the nose (from behind). there are 2 screws on each side underneith that go up into the headlight brace bar. There are a few plastic push rivets along the botom center, and also along the top center. There is a fender bolt next to each outer headlight.
Thats it. It's just nuts and bolts.
remove air dam and both side splash panels. Then remove the 3 bolts from each side that hold the fender to the nose (from behind). there are 2 screws on each side underneith that go up into the headlight brace bar. There are a few plastic push rivets along the botom center, and also along the top center. There is a fender bolt next to each outer headlight.
Thats it. It's just nuts and bolts.
Thread Starter
Registered User
Joined: Oct 2001
Posts: 525
From: Pembroke Pines FL USA
Re: Camaro front bumper
Originally Posted by TraceZ
easy.
remove air dam and both side splash panels. Then remove the 3 bolts from each side that hold the fender to the nose (from behind). there are 2 screws on each side underneith that go up into the headlight brace bar. There are a few plastic push rivets along the botom center, and also along the top center. There is a fender bolt next to each outer headlight.
Thats it. It's just nuts and bolts.
remove air dam and both side splash panels. Then remove the 3 bolts from each side that hold the fender to the nose (from behind). there are 2 screws on each side underneith that go up into the headlight brace bar. There are a few plastic push rivets along the botom center, and also along the top center. There is a fender bolt next to each outer headlight.
Thats it. It's just nuts and bolts.
Thread
Thread Starter
Forum
Replies
Last Post
heavenly_six
Parts For Sale
0
Dec 10, 2014 12:23 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM
