88 C1500 SWB TRuck, Its Black Matallic in Color with gray Interior. body shows 158k on it but engine was replaced with a Carbed 350 by previous owner. Has one rust spot on the passenger Cab Corner, other than that its rust free and only minor scratches and few dings. Pretty straight Truck(Have cab corner to go with it) Interior is in Great Shape only thing it needs is a seat cover or newer seat. Has new Headliner, and Newer Gray Doorpanels. Power Windows and Locks.

Engine is 350 .030, with small Isky Cam, Performer Intake, with new 600CFM Performer Carb, Headers, Dual 3" Exaust, Flowmaster mufflers.

Transmission is a rebuilt 700R4 with less than 1000 miles on it. New stock Converter and Corvette Servo.

Wheels are 18" Eagle Alloys with "NEW" Kuhmo Ecsta Tires. Some curb rash on front passenger Wheel but would sand down and repolish easily. Spare is still under the bed.

Stereo is a NEW Pioneer CD/Stereo with New Polk Dash Speakers.

Things the truck Needs: Needs front End alignment, i replaced alot of front end parts ie balljoints, idler arm, 3" springs etc so it needs an alignment. Passenger cab corner has a rust hole in it(have new cab corner to cut a patcxh panel from, the entire cab corner DOES NOT need replaced) Has an Exaust Leak near the collectors on the headers. Engine sometimes deisels on after cutting the engine off, i've played with the timing and fuel but cant figure it out. I'm a FI guy and not good with carbs. I usualyy just shut it off in Drive then put it in park, it keeps that from happening. Truck runs great otherwise, i drive it all the time with no problems. If i think of anything else I will let you know. Will try and get pics asap. $3800 Firm. I have it listed in the truck trader for $4200.
Guys need to get this truck sold, i have updated alot of the information. Here are some pics........jt








Pic of Curbed Wheel and Interior

 

Too bad it's one of those non-automotive trucks.

Good luck with the sale.