Suggest a Nitrous cam for 300 shot
Thread Starter
Registered User
Joined: Aug 2000
Posts: 53
From: Victoria, TX
Suggest a Nitrous cam for 300 shot
Posted this in nitrous forum but got very little response....
Currently, my 396 has a solid roller ,248i/254e, 61X is lift with 1.6 rrs, on 114 LSA. Heads are AFR 210s with the CNC race flow porting. Advertised head flow is around 290ish on intake and 225is on exhaust. I run a Turbo 400 with around 4000 stall. I would like suggestions about what cam I could upgrade to that will love a big shot (300) of nitrous. Keep in mind that I am not concerned with drivability but cam shaft must not rev past 7K (stock pcm issue).
Currently, my 396 has a solid roller ,248i/254e, 61X is lift with 1.6 rrs, on 114 LSA. Heads are AFR 210s with the CNC race flow porting. Advertised head flow is around 290ish on intake and 225is on exhaust. I run a Turbo 400 with around 4000 stall. I would like suggestions about what cam I could upgrade to that will love a big shot (300) of nitrous. Keep in mind that I am not concerned with drivability but cam shaft must not rev past 7K (stock pcm issue).
Registered User
Joined: Jan 2002
Posts: 160
From: Denton,TX USA
well, maybe just up the exhuast duration to like 260-265. Thats alot of exhuast to get out of there. I mean mine is 230/244, and its listed as a street strip with 125+. probably good to 200.
Last edited by menlatin; Aug 30, 2003 at 11:36 AM.
Thread
Thread Starter
Forum
Replies
Last Post
stockssn2o
Parts For Sale
14
May 25, 2015 08:54 AM
99TransAmWS6
Parts For Sale
5
Feb 3, 2015 08:27 AM