Solid Roller Part Number Question

Reply Subscribe

Thread Tools

Search this Thread

Aug 3, 2004 | 08:32 PM

smokindastangs

Thread Starter

Registered User

Joined: Nov 2002

Posts: 351

From: Marietta, Ga

Solid Roller Part Number Question

I was wondering if anyone knew if a 12-225-4 (cc306 solid) and a 813-16 (solid lifters) would work on a LT1 engine. Also, Would I need an extra vacuum canister? Thanks, Jason

Aug 3, 2004 | 08:57 PM

JordonMusser

West South Central Moderator / Special Guest

Joined: Dec 1998

Posts: 1,650

From: Coppell, TX USA

Re: Solid Roller Part Number Question

cc306 is not a solid roller cam. its is hyd.

Aug 3, 2004 | 09:00 PM

smokindastangs

Thread Starter

Registered User

Joined: Nov 2002

Posts: 351

From: Marietta, Ga

Re: Solid Roller Part Number Question

well....this isn't just a regular 306. Even comp has this part number listed as a solid roller.

Aug 4, 2004 | 12:02 AM

Mindgame

Registered User

Joined: Nov 2001

Posts: 2,985

From: In a house by the bay

Re: Solid Roller Part Number Question

I assume you're talking about the S306? May want to check that one again... it's a mechanical flat tappet cam, not a roller.

-Mindgame

Aug 4, 2004 | 11:49 AM

smokindastangs

Thread Starter

Registered User

Joined: Nov 2002

Posts: 351

From: Marietta, Ga

Re: Solid Roller Part Number Question

Ok, well I am glad that I am aware of that...now will it work in an lt1?

Aug 4, 2004 | 12:45 PM

SStrokerAce

Banned

Joined: Oct 2002

Posts: 6,518

Re: Solid Roller Part Number Question

Quote:

Originally Posted by smokindastangs

I was wondering if anyone knew if a 12-225-4 (cc306 solid) and a 813-16 (solid lifters) would work on a LT1 engine. Also, Would I need an extra vacuum canister? Thanks, Jason

the -4 at the end of that part number gives away the fact that it's a flat tappet cam. 813's are flat tappet lifters too, they go with the cam but not what you are looking for.

Bret