headers for F body with 18* heads?
Thread Starter
Registered User
Joined: Jul 2005
Posts: 435
From: Flint, Michigan
headers for F body with 18* heads?
does anyone know if any header company makes a header for 18* heads in a F body? I have a 96 4th gen. I checked all the sites I could think of, Heddman, Hooker, Lemons, Stahl. thanks
Super Moderator
Joined: Jul 2005
Posts: 9,507
From: Okemos, MI
Re: headers for F body with 18* heads?
Originally Posted by Colin91Z
Not even close.
I figured that since the bore spacing is the same, LS1 headers might work on an LT1 equipped with 18-degree heads.
Registered User
Joined: Dec 2004
Posts: 968
From: Wichita, KS
Re: headers for F body with 18* heads?
Originally Posted by JakeRobb
Okay. Just checking.
I figured that since the bore spacing is the same, LS1 headers might work on an LT1 equipped with 18-degree heads.
I figured that since the bore spacing is the same, LS1 headers might work on an LT1 equipped with 18-degree heads.
Registered User
Joined: Jan 2003
Posts: 90
From: The Assembly Room
Re: headers for F body with 18* heads?
Yep.... Lemons makes them.
There's a few pics here.....
http://pg.photos.yahoo.com/ph/masnar...=/414c&.src=ph
They were about $800 uncoated back when this car was built, maybe 4 years ago.
There's a few pics here.....
http://pg.photos.yahoo.com/ph/masnar...=/414c&.src=ph
They were about $800 uncoated back when this car was built, maybe 4 years ago.
Registered User
Joined: Nov 2004
Posts: 1,374
From: Raleigh, NC
Re: headers for F body with 18* heads?
Originally Posted by robvas
The middle 2 ports are siamesed on the LT1/SBC. They're not on the LS1. A 5.0 header would be a closer fit.
Thread
Thread Starter
Forum
Replies
Last Post