I am thing of a catch can, My set up is a 355 T-Trim set up. Now i was thinking about putting valve cover breathers in both sides BUT, here in Ontario, Canada, The cops and emissions police are looking more and more....and so on...

Is there any diff in what size the line is coming out of the valve cover to the catch can i think the biggest is 1/4 ?

What i am thinking is a breather is large, will 2 1/4 rub hose off each valve cover to a catch can do the same job as the breathers?...

 

Do a search for "oil catch" on E-bay. there are a ton of them.

Then hook it in line on the PCV system coming from the PCV valve.

Good luck!